Turn Instructions Voir l’historique

A turn instruction is the combination of text, images, and speech that Waze provides to the user in providing route guidance, ideally with minimal thought and without confusion.

This page covers the topic of turn instructions generally and includes guidance for modifying all editable aspects of a turn instruction - but not lane guidance.

Overview

Turn instructions tell and show a user where and when to turn, keep, exit, continue, or make a U turn. Editors must take special care to ensure that turn instructions give Wazers clear and useful directions.

By default, a turn instruction will use the street name of the outbound segment for both display and spoken directions. If there is a road shield associated with the primary street name on that outbound segment and that street name is simple and contains the same number as the shield then the turn instruction will display the shield in place of the street name.

Editors can customize turn instructions with road shields, destinations, exit numbers, and more. this enhances the Waze experience and is encouraged.

General principles

Turn instructions should match signage as closely as possible within the limitations of the Waze interface, while remaining sensible.

Visually, the elements of the turn instruction should match the visual order of elements on the sign as closely as possible.

Custom turn instructions should be added any time signage for a particular turn includes more than just the primary street name (or associated shield) of the outbound segment. In particular, custom turn instructions should be added:

  • for any numbered exit;
  • anywhere a shield is desired but won't be automatically displayed; and
  • anywhere else that directional signage shows something other than the primary name (or shield) of the outbound segment such as most exit ramps and onramps, wayfinders, intersections with specialized signage for a turn.

Here are examples of those use cases.


A good rule of thumb to use is that if there is a big green sign (BGS), then there should be a turn instruction. But that is not an absolute rule.

How to do this

As stated, the goal is to resemble the road signage as much as possible, but the functionality has limitations such as a lack of horizontal display space and a restriction to two lines of information (plus an exit sign).

The best practice is therefore to use the top "Visual instructions" line of the turn instructions for road shields if there are any, and to put any text below that separated by forward slashes. You can see this in action here:




....

Compass directions should be spelled out using large-and-small-caps (Nᴏʀᴛʜ, Sᴏᴜᴛʜ, Eᴀꜱᴛ, Wᴇꜱᴛ) when they are used to represent a direction of travel.

The word "to" should be included in visual fields if and only if it is actually present on signage.

The auxiliary legends "to", "via", and "jct", where present on signage, should be capitalized using small caps if they are capitalized on the sign (ᴛᴏ, ᴠɪᴀ, ᴊᴄᴛ), and should match the case on the sign if in title case (To, Via, Jct) or lowercase (to, via, jct).

To insert large-and-small-capitals or small capitals as needed:

Although the large and small caps above render somewhat strangely on the web, and especially in the fixed-width copy-paste boxes, rest assured: they look good in the app.

Editable components of a turn instruction

Visual instructions

The visual instructions component contains the "meat" of the instruction, including most shields.

In the app, the "visual instructions" component is displayed as the primary element of the turn instruction, on the first line (below the distance to turn) and with bold text.

Toward

The toward component is primarily intended for things like control cities and other destinations, but it may also be used for additional road names and shields where doing so would allow better matching of a sign layout.

In the app, the "toward" component is displayed in non-bold text as the second line of the instruction, below the "visual instructions" component.

Exit signs

The exit signs component is used to insert an exit number in a dedicated, fixed place.

In the app, the "exit sign" is displayed in the top right corner of the turn instruction panel.

Voice prompt

The voice prompt component allows you to decide whether to override the "Waze default" voice prompt.

In the app, this affects both the spoken instruction and the arrow that is displayed on screen before lanes appear.

TTS

The TTS component allows you to override the street name that would otherwise be spoken in the instruction.

In the app, the "TTS" component replaces the street name portion only of any TTS instruction. It affects only the spoken instruction, and only if you are using TTS (because, of course, only TTS speaks street names).

Lanes

The Lanes component, including the number and association of lanes and the arrows displayed on screen once lanes appear, is editable using the lanes interface and is outside the scope of this article.

Non-editable components of a turn instruction

Distance or time

The distance or time component is based on reality and explained in more detail in the article on audible instructions.

Guidance

Exit signs

Use the right exit sign if the exit is to the right of continuing lanes, or the left exit sign if the exit is to the left of continuing lanes.

We’ve requested exit sign options without an arrow, which will be useful in cases where (we hope) inheritance will take you down an "exit right, then keep left" path or similar. For the time being, [don’t add turn instructions yet at all/add the one that fits best and leave yourself a map comment or other note to come back].

Type the exit number into the field as it appears on the sign (numbers, letters, with or without spaces and hyphens; but remove spaces if necessary to fit within the character limit).

Visual instructions and toward

The “Visual instructions” and “Toward” components contain most of the visual elements of a turn instruction, including road names, shields, control cities, and other destinations (but not exit numbers).

Think of the “Visual instructions” field as line 1 of the visual instruction, and of the “Toward” field as line 2 of the visual instruction.

Exit ramps, entrance ramps, wayfinders, and where there is a Big Green Sign

This subsection applies to all instructions onto, off of, or between freeways, exit ramps, onramps, or similar, and wherever there is a Big Green Sign.

The principal goal of mapping turn instructions is to match the layout of any Big Green Sign as best we can, and to match non-BGS signage in a consistent way.

Which signs to use

Where there is a Big Green Sign assembly for the movement you're mapping (like a typical freeway exit sign), use information from the last Big Green Sign assembly before or at the location of the movement.

Where there is not a Big Green Sign (which is often the case at the foot of an exit ramp or before entering an onramp), combine shield elements from the Directional Assembly and text elements from the Destination Sign [see pages 149-165 of MUTCD 2009 edition].

Shields
Guidance Example
Generally, shield elements should be placed in the “visual instructions” field (i.e., on line 1).
Rarely, shield elements may be placed in the “toward” field (i.e., on line 2) only when the shield is near the bottom of a multi-line sign.
Add shields in the order they appear on the sign assembly.
Any shield that is preceded by “ᴛᴏ” on the sign should be preceded by “ᴛᴏ” (using small caps) in free text in Waze as well.
If two or more adjacent shields have the same direction, omit the direction from all but the last such shield (they “share” this direction)—unless there is a compelling reason not to do so.
Do not include text separators between shields, shield directions, or auxiliary legends (“ᴛᴏ”, “ᴠɪᴀ”, “ᴊᴄᴛ”).
Text elements (street names and destinations)
If there are no shields
Guidance Example
If the instruction contains only one text element (and no shields), include that text element as free text in the "visual instructions" field.
If the instruction contains two text elements, include the first text element as free text in the "visual instructions" field, and the second text element in the "toward" field.
If the instruction contains three text elements, include the first text element as free text in the "visual instructions" field, and the second and third text elements in the "toward" field with the appropriate separator.
If the instruction contains four or more text elements, use your judgment, and spread them between "visual instructions" and "toward" as appropriate with the proper separators.
In conjunction with shields
Guidance Example
If the instruction (in addition to shields) contains only one text element, place the text element in the "toward" field (except in the rare instance that the shield and text are on the same line on the same sign, in which case the text element can be added as free text in the "visual instructions" field).
If the instruction (in addition to shields) contains two or more text elements, generally, place all text elements in the "toward" field with the appropriate separators.

Exception: if the first text element(s) in order, but not all of the text elements, are alternative names for the shielded road, add the first text element(s) as free text following the shield (with separators if there are more than one), and the subsequent text element(s) in the "toward" field.

In this case, "Airline Dr" and "Tulane Ave" are alternate names for US-61.

Surface intersections

This subsection applies to instructions at intersections that do not involve freeways, exit ramps, or onramps, and that do not have a Big Green Sign.

The principal goal of mapping turn instructions is to match signage in a consistent way.

If the only signage visible when approaching the intersection matches the primary street name of the outbound segment, there is no need to change the turn instructions.

If signage visible when approaching the intersection contains either additional or different information,

  • Shields and road names should generally be in the “Visual instructions” field, with shields before the road name.
  • If both shields and a road name are present, omit the direction (even if signage includes the direction).
  • If only road shields are present, include the direction when signage includes the direction.
  • Include any destinations and control cities in the “Toward” field (with appropriate separators).

Where a shield is used (often with a “ᴛᴏ” auxiliary legend) to show that the immediate turn will take you toward another road or highway, you can include that shield in the “Toward” field (together with any auxiliary legend present). Such signage may often be found on frontage roads that provide freeway access.

Voice prompt

See Voice prompt.

TTS

The TTS box can be used to override the street name component of the instruction.

Follow the same general principles as with road names. Abbreviations and acronyms work here, but you can also use this field to spell things out to be sure they are pronounced correctly.

Feel free to make small adjustments to make Waze talk conversationally. For example, add “the” before the name of a destination that would normally be preceded by “the” (e.g., “Poydras St » the Superdome” or “US-90 BUS W » the Westbank”)

Interface

[more to come. watch this space!]