User:The Cre8r/WIP/NC Speed Limit Mapraid View history

(→‎Basic Scripts and Extensions: removed PA Speed Limit Popup)
Line 93: Line 93:
** Do not guess. If there is no SV, and if there is no information from local drivers, we cannot know if there are signs. Unless you have information from someone who has recently driven on the street, or from local ordinances listing speed limits.
** Do not guess. If there is no SV, and if there is no information from local drivers, we cannot know if there are signs. Unless you have information from someone who has recently driven on the street, or from local ordinances listing speed limits.
**If you '''do not know''' the speed limit for a segment '''leave it blank'''. It is safer to not set a speed limit then to get it wrong.
**If you '''do not know''' the speed limit for a segment '''leave it blank'''. It is safer to not set a speed limit then to get it wrong.
* When a speed limit changes at an intersection, the sign for the new speed zone mighte be up to 200 feet after the intersection. If the speed limit changes more than 200 feet from the intersection, add a junction at the sign and make the speed limit change there.
* When a speed limit changes at an intersection, the sign for the new speed zone might be up to 200 feet after the intersection. If the speed limit changes more than 200 feet from the intersection, add a junction at the sign and make the speed limit change there.
* Long term work zone speed limits should not be mapped instead of the "ordinary time" speed limits.  Please add the info to this form and we will address it after the mapraid ((INSERT FORM))
* Long term work zone speed limits should not be mapped instead of the "ordinary time" speed limits.  Please add the info to this form and we will address it after the mapraid ((INSERT FORM))
*If you find a Sign saying Reduced Speed Ahead = XX. Then usually about 1000 feet down the road you will find the New Speed limit sign, add a junction at the sign and make the speed limit change there.
*If you find a Sign saying Reduced Speed Ahead = XX. Then usually about 1000 feet down the road you will find the New Speed limit sign, add a junction at the sign and make the speed limit change there.

Revision as of 22:02, 21 May 2016

North Carolina Speed Limit Mapraid 2016 ended on 03 Jun 2016 21:00:00 UTC. Please check back here for results and check the Mapraid Forum for mapraid announcements.

The North Carolina Speed Limit Mapraid will be 3 June through 12 June 2016. The participants will be divided into several groups, one for each section of the map. Each group will have both local and senior editors, one of which will be the "Group leader" - listed in blue below. Please direct all questions to your group leaders. The raid hosts will be available across all areas for added support.

Goal

Our goal is adding correct speed limits on segments in North Carolina, with emphasis on Major Highways, Minor Highways and Primary Streets.

  • If there is a large area with speed limits already added that are incorrect, please bring it to your group leader's attention.

Please also make basic common-sense edits as you work on the mapraid goals -- fix bad turns and other obviously wrong information on the segments you are editing, but keep focused on the mapraid goals. If you see bigger problems that can be addressed later, contact your group leader or record it in this form.

Speed Limit Sign

Hosts

Editor Rank Roles Group
Ottonomy (PM) 6 GC / MapRaid Coordinator 1
s18slider (PM) 5 State Manager 2
Onmywaysir (PM) 4 Area Manager 3
The_Cre8r (PM) 3 Area Manager 4

Communication

When you are editing in the raid area, please set yourself visible and enable the Live Users layer. We will use Slack Channels If you are not already part of the WazeMapRaid slack team, please look for your invitation to slack after mapraid registrations are processed. If you have trouble getting into the slack team or your group channel, please reach out to one of the MapRaid organizers.

You can also use WME chat. The WME Chat addon is recommended.


Groups

group 01 - Eriegroup 02 - Elk State Forestgroup 03 - Williamsportgroup 04 - Scrantongroup 05 - Pittsburghgroup 06 - Altoonagroup 07 - Harrisburggroup 08 - Philadelphia
Right-click your group area to open WME


Important / Mapraid guidelines

Please read the entire MapRaid wiki. If you are still uncertain what to do about something you see on the map, please ask your group leader Thank You for your help with the map.

Speed Limit Guidelines

Use Waze Street View to find Speed Limit Signs. You may also get information from local drivers. You may use information from local ordinances posted on township, borough, or city websites. Do not rely on predicted speeds (with "verified" check box).

Please set your WME preferences to imperial and enter speed limits in miles per hour.

Some segments have unverified speed limits. These speed limits were predicted by waze. We must check each unverified speed limit. If it is correct, we can use the "Verified" check box. If it is not correct, we must replace the speed limit value.

North Carolina follows the US guideline for speed limits, with a few exceptions listed below.

North Carolina guidelines

  • If there is no SV, do not map SL. (No SV => No SL)
    • Do not guess. If there is no SV, and if there is no information from local drivers, we cannot know if there are signs. Unless you have information from someone who has recently driven on the street, or from local ordinances listing speed limits.
    • If you do not know the speed limit for a segment leave it blank. It is safer to not set a speed limit then to get it wrong.
  • When a speed limit changes at an intersection, the sign for the new speed zone might be up to 200 feet after the intersection. If the speed limit changes more than 200 feet from the intersection, add a junction at the sign and make the speed limit change there.
  • Long term work zone speed limits should not be mapped instead of the "ordinary time" speed limits. Please add the info to this form and we will address it after the mapraid ((INSERT FORM))
  • If you find a Sign saying Reduced Speed Ahead = XX. Then usually about 1000 feet down the road you will find the New Speed limit sign, add a junction at the sign and make the speed limit change there.
  • We do not Set Speed limits for School Zones. Use the current Speed limit of the road. If you see any please add them to this form and we will address it after the mapraid ((INSERT FORM))

Summary of National Guidelines

Regulatory
Yes

Advisory
No
  • Only map speeds found on regulatory white rectangular signs with black lettering.
  • Do not map advisory speed limits (generally an orange or amber rectangular sign with black lettering).
  • Where there are variable speed limits, map only the speed limit which is in effect most of the time during daylight hours (most hours of the day, days of the week).
  • Do not map special speed limits for special vehicles. Waze only supports speed limits for private passenger cars.
  • Where the speed limit changes, make it change in the map. A new junction may need to be added. But do not add a new junction for a speed limit if it will be within 200 feet of an existing junction.

Road Segment Lock Guidelines

When you edit any segment during the mapraid, please set the lock level correctly. If you are unable to lock it to the correct level, then lock it to the level of your rank.

Any road of a certain segment type must be locked at least to the rank (level) in the chart below. Roads may be locked higher for protection and special situations (areas with construction, tricky design, frequent mistakes, incorrect images, etc.).

The Cre8r Minimum Locking Rank Standard
Segment Type Statewide
 Freeway  5
 Ramp  Highest rank of connected segments
 Major Highway  4
 Minor Highway  3
 Primary Street  2
 Street  1 (Auto)
 |-|-|-|-|-|-|-|-|-| Railroad |-|-|-|-|-|-|-|-|-|  2
 • • • • Ferry • • • •   5
 Private Road  1 (Auto)

Base Map Areas

There are still many areas in North Carolina which have not been touched by editors since the "base map" was imported in 2009. Only touch these areas if it is necessary to reach the objectives of this mapraid. If no information is available for setting Speed Limits, do not fix these parts of the map. These areas will be addressed at a later time.

  • Before setting speed limits on a segment, set the road direction correctly and correct all turns and other obviously incorrect information.
    • Please use the County GIS Map for correct road information. The can be found on the NC wiki page.
  • If roads are very bad and very difficult to fix, you may report the problem to your group leader.

Edit Quality and Mass Editing

You are responsible for every edit you make, whether you make it by hand or use a script. Every edit you make should meet the goals of this mapraid AND make a noticeable improvement to the map. Do not make edits simply to gain points without improving the map. If a segment is "good enough" for the waze map, do not edit it.

If it looks like you are making unnecessary edits or hunting for points, you may be banned from this mapraid and from future mapraids. In addition, Waze will throttle your edits and points if you use scripts excessively.

Update Requests (URs)

Some editors have made URs about speed limits they have seen on the road. These all contain the string "mph". If you can find these URs, you can use them to help you set the correct speed limit on that segment.

Other types of URs are not a focus of this mapraid. If you spot a big problem which should be addressed, please let a group leader know.

Road Types, Names, and Functional Classification (FC)

Road type classification is not a focus of this map raid. It has been addressed in many areas of North Carolina. If you see an easily-fixable problem on the segments you are editing for speed limit and elevation, please fix it. If you find a large problem with road type, let a group leader know.

Road Names are not a focus of this map raid. If you see an easily-fixable problem on the segments you are already editing, please fix it. If you see any large problems with road naming, please let a group leader know.

Places

Places are not a focus of this mapraid. If you see obviously incorrect places that will cause incorrect routing, please feel free to fix it. Otherwise, please feel free to ignore places.

Issues to Address after the MapRaid

Any major issues that need to be address will be followed up by local editors after the MapRaid conclusion. Issues such as city name merging, large scale naming (primary or alt), etc, will be handled after the fact. Remember, the concentration is speed limits and lock levels.

Any issues that require future follow up should be entered on this form.

Issues to Address after the MapRaid

Mapping Resources

Only use Streetview and Satellite view from within waze, websites from businesses, and the sources listed below. Do not use Google Maps. Do not use Google Maps Streetview. Do not use any other online mapping resources.

Warning: If you copy information from unauthorized sources, you may be removed from this mapraid. Also, every segment or place you edited might be removed from the map. Copying information from copyrighted sources is illegal!

Highest priority roads in PA

NC Mapping Resources

Tools for this mapraid

Basic References

New editor welcome page
Waze Map Editor
Best Map Editing Practice
Editing manual
Common editing mistakes
How to make a Permalink; YouTube
All about using the WME Chat
WME Reference Sheet[PDF]
a printable double-sided tri-fold quick reference guide to some of the common topics used in WME.
Community Plugins, Extensions and Tools
links and descriptions to most of the editing scripts being used. Some of these are essential to good editing, and others make the editing process much easier. WME Validator, URO+, and WME Toolbox are highly recommended.
How to Install a Chrome Extension (YouTube)

Basic Scripts and Extensions

Mapraid Overlay
This script shows the boundaries of each mapraid group area. It may be useful to you if you have editable area in more than one mapraid group area.
WME Color Highlights
Install Chrome Extension or tampermonkey / greasemonkey script
Check the option for "No Speed Limit" and Uncheck the other highlight options.
Segments with no speed limit or unverified speed limit will be highlighted orange.
Speed Limit Helper
Makes it easier to add the correct speed limits.
tampermonkey/greasemonkey required
WME Chat Addon
a script that improves the WME chat interface. For a list of all the features check the thread here -- Tampermonkey/Greasmonkey required

Advanced Scripts and Extensions

WME Context Menu
Right-click pop-up menu that works with speed limit helper.
requires tampermonkey / greasemonkey. Works best alongside Speed Limit Helper.
Read more at WME Context Menu
URO+ settings to find speed limit URs
Search for mph URs using URO+
In the "misc" tab, scroll down to custom markers, choose the last one, and type "mph" in the text box.
Speed Limit URs and elevation URs are the only ones we should be working with during this mapraid.
WME Toolbox
Now with a speed limit highlight option.
This script has lots of ways to help remove unnecessary nodes, cut segments, locate "Soft Nodes", or nodes with undefined directions.
Validator
highlights issues on the map and can generate a very detailed report with U.S. wiki references and possible solutions.

Mapraid edit lists

Spreadsheets and forms are being used to streamline management of various group efforts and track important edits. Below you can find links to use these these forms, sheets, and see the lists.

Results

Check back here after the raid is completed to see the results and achievements

MapRaid Promotions

Some editors really let their bright side out, and let their community skills shine. This is even more evident in a concerted group effort with high-density editing like a MapRaid!. Editors of all ranks working closely with each other and the Champs, really lets us everyone get to know each other, and allows certain editors to be recognized for their skills and effort.

When the Champs see someone consistently editing well, interacting well with the community, and knowledgeable of the various details from the Wiki, they can issue promotions. This can be anything from the size of a managed area, to a rank increase, or even a new role.

Watch here for results of promotions during and after the raid.