Changes

From Wazeopedia

Partial restrictions

19,411 bytes added, 2 months ago
Adding/editing a difficult turn: added language that DTs can be set in junction boxes and changed "TRs" to "arrows" since we're talking about the interface
{{ReturnTo | Editing manual | the editing manual}}
{{NeedImage|Numerous images A '''partial restriction''' is entered on a segment or a turn restriction. A partial restriction is often referred to as a '''time-based restriction''' ('''TBR'''); specifically as a '''time-based segment restriction''' ('''TBSR''') or '''time-based turn restriction''' ('''TBTR'''). They are used to allow or to restrict certain vehicle types to be routed or prevented from routing on that segment or turn. The TBSR or TBTR means the segment or turn will tell the routing algorithm that some '''vehicle type(s)''' are forbidden or allowed on a segment or turn; or some or all vehicles are forbidden at '''certain times, or on certain days or dates''', or both; that certain special types of travel are needed for this pageallowed.}}
A '''partial restriction'''Note currently only private car, taxi, '''time-based restriction''' ('''TBR''')motorcycle, and electric are allowed to be selected in the app; therefore restrictions preventing trucks or buses from a segment or '''time-based turn restriction''' ('''TBTR'''), on do not have any effect in the app. Setting a segment to be a turn or bus only segment means some '''types will prevent any user from being routed and is the equivalent of vehicle''' are forbidden or some or a prohibited all vehicles are forbidden at '''certain times, or on certain days or dates''', or bothprivate cars and taxi restriction.
Partial restrictions are often used for bus lanes, turns that are forbidden during rush hour, segments that change direction for morning and evening rush hour, bridges and ferries that are only available during the day, and roads that are closed in winter.
If a turn is forbidden on all days, dates, and times, then use [[Turn_restriction#Turn_restrictions_.28allowed_turns.29|turn restriction]] or if the segment never allows travel in that direction then [[Set_one-way_road#Set_Road_Type.2C_Direction.2C_and_Elevation|one-way road]] instead. If no traffic will ever be allowed to travel through an intersection, it should be disconnected. If no traffic will ever be allowed to travel on a segment, the segment should not be added to the map.
In some cases, the turn (typically left-hand) may simply be difficult to make at certain times of the day due to uncontrolled intersections during heavy traffic periods. The difficult turn should not be installed where there is a traffic light or a dedicated left turn lane.
For big road-closing events such as marathons and parades, please see [[Mega eventsMajor Traffic Event]] For construction-related traffic closures, please see [[Real time closures]].
== Overview ==
Partial restrictions can be based on:
# An entire segment controlling traffic flow for one or both directions'''TBSR'''# Specific turns from one segment to another'''TBTR'''
Each of these restrictions can be further restricted based on combinations of:
Examples:
* Interstate truck-only ramp
* No trucks allowed between 9a-3p weekends
* No left turn 7a-9a and 4p-6p weekdays
* HOV lanes eastbound 5a-11a, westbound 3p-10p
* Flexible capacity lanes which are a single roadway, but run a different direction for morning and evening commutes (frequently found on congested freeways and some primary streets, sometimes with limited exit or turn options to create express traffic routes)
* Interstate truck-only ramp (not used in app at this time)* No trucks allowed between 9a-3p weekends (not used in app at this time)* Vehicle towing a trailer(not used in app at this time)
While this is a very flexible system, it requires what might initially look like can be a very complex interface to manage the many combinations possible. It is certainly very important that any changes made to any current scheduled restrictions on the map be done with extreme caution so as not to destroy hours of work by prior map editors. Therefore be sure to only make changes to scheduled restrictions with careful consideration and patience.
== Segments ==
===Segment restrictions===The segment restriction method changed in 2017. Some attributes changed location in the editor and some new ones were added.[[ImageFile:Add_restriction1.PNG‎|thumb|right|50px]]====Selecting a segment====#Select a segment so that the name appears to the left of the map editor.#Select the yellow '''Add restrictions''' radio button (Time Based Segment info Restrictions) on the left panel when the segment is selected.#It will be '''Edit restrictions button highlight(#)''' if there is already a restriction(s) on the segment.[[File:Edit Restrictions1.jpgPNG‎|thumb|right|50px]]#First restriction pop-up window appears[[File:Restriction_first_popup.PNG‎|center|200px|border]]
When no traffic or certain vehicles are not permitted on a segment (or road), you can set restrictions on the segment directly preventing any traffic flow across the segment. This is easier than trying to restrict all the turns that come from other segments to this one segment. Some restrictions may only affect a certain direction, or sometimes a road allows traffic flow one way and then later in the day it switched to the opposite direction. ===First pop-up window===
Segment restrictions ====Toll====There are added or edited through the ‘Add/Edit restrictions’ button two ways to mark toll:# Toll attribute in the bottom left pane (or corner of the ‘T’ keyboard shortcut). first TBSR popup window{{clear}}# Toll free restriction is enabled in second TBSR popup window
That brings =====Toll attribute check box=====The toll attribute check box has moved to the first pop-up window of a segment restriction. It used to be under the "Time based restrictions" panelsegment's road type.[[File:Toll_attribute_box_checked. Segments supporting two-way traffic will display two tabsPNG‎|center|300px|border]]#Check the toll road attribute in the bottom left corner of the popup box[[File: "A to B" New Toll2.PNG|right|150px|border]] #Mark a road segment as a toll segment only if the segment has a toll booth, transponder reader, or other tolling device and "B if no vehicles travel as toll free on that segment.#Once a segment is marked as a toll segment then the toll attribute is displayed under the road segment name. You have to A" referring go to the letters A and B on either end of TBSR to deselect the selected attribute. #Designating a segment as toll will prevent setting any vehicle type as toll free.#Designating a two way segment indicating with the direction of orientation related to toll attribute will designate both directions as a toll road. Designating a one way segment with the toll attribute will designate that direction of traffic flowas a toll road.
The text below =====Toll by default (toll free designation)=====#If there are any vehicle types that are designated toll free on the tab will describe which direction of travel segment, then any allowed vehicle that is not designated as toll free is associated with that tab assumed to help determine which traffic direction is represented by each tabpay a toll.[[File:Toll-free designation.PNG ‎|center|300px|border]]#Note the toll free vehicle must also be listed in the allowed restrictions too.[[File:Allowed private vehicles. PNG ‎|center|300px|border]]
[[Image:Segment restriction list add button highlight_smIf a vehicle type is not listed in the allowed section then Waze assumes it is prohibited and will not check for the vehicle’s toll free designation.gif|right]] Click In short Waze thinks the "vehicle type is prohibited and it can't be routed there as a toll free vehicle since it is prohibited. In the example above only private vehicles are allowed on the road segment as a toll road. Private vehicles that the user designates as HOV-2+ Add restriction" button will be allowed to create a new restrictionuse the road toll free. All other vehicle types are prohibited.
See If a vehicle type is designated as toll free why doesn't Waze just recognize that they are allowed? There are notes in the section restriction popup windows that impart this knowledge.#Hover over the small blue lower case i in the toll free restriction and a black box pop-up appears that says "Vehciles must also meet all of the "Allowed" restrictions".[[#Setting restrictionsFile:Must_be_in_allowable.PNG|center|200px|Setting restrictionsborder]] for information on how to set the #Orange note in bottom left of '''Allowable''' restrictionsays "Other vehicles are restricted" (i. Segment and turn restrictions are set using the same instructions covered belowe. You can create multiple restrictions for the segment to allow for restrictions that might only occur at different times of the day, or maybe the restriction is at different times on the weekdays than on the weekendsprohibited)[[File:Other_vehicles_prohibited.PNG|center|300px|border]]
====Selection of direction====[[ImageFile:Restriction_first_popup.PNG‎|right|150px|border]]#First restriction pop-up window has three main items: #* A > B #* B > A#* Two way#Restrictions copy to other sidehave three main '''Types'''[[File:Restriction Types.jpgPNG|right|150px|border]] Once you create #*'''Allowable'''#*'''Toll free'''#*'''Prohibited'''#Restriction '''Types''' are added as '''Lines''' under the restrictions for one applicable direction you can simply copy all (s) of travel.[[File:Restriction Lines.PNG|right|200px|border]]#*The picture to the right has three '''Lines''' of restrictions to ; one each of Allowed, Toll free, and Prohibited#Restriction '''Lines''' contain '''Rules''' which are partially displayed in the other direction with Summary; rules are fully described below#Click the link labeled "Copy all to grey '''Add new''' box under the other side." Otherwise only one appropriate direction of travel will be restricted and for the other direction will restriction to be fully openentered#Second restriction pop-up window appears[[File:Restriction second pop up window.PNG|center|200px|border]]
After Note #Each restriction '''Type''' on the first pop-up window is compared to other Types as an '''AND''' statement.#Each restriction '''Line''' on the second pop-up window (within the restriction Type) is compared to other lines in that restriction line as an '''OR''' statement.#Each restriction '''Rule''' within a single restriction '''Line''' is created you can edit [[Filecompared to other rules as an '''OR''' statementSo for the three restriction lines in this photo: Pencil_icon.jpg]] or remove [[File: X_iconRestriction Lines.jpgPNG|right|200px|border]] #* a ) All Private vehicles are allowed as tolled vehicles#* b) Private vehicles that are HOV-2+ are allowed as toll free vehicles#* c) All vehicles are prohibited from 00-02#* d) Since HOV-2+ is a subset of private vehicles, it does not have to added as a separate allowable restriction with ; the appropriate action buttons.{{clear}}allowable restriction for all private vehicles includes private vehicles and HOV-2+
=== Multiple segment selection ===A vehicle is allowed as toll free, if it is a) a private vehicle AND b) a private vehicle with HOV-2+ AND c) Not being routed 00-02. A vehicle is allowed as tolled, if it is a) a private vehicle AND b) Not being routed 00-02.All vehicles are not allowed if it is 00-02.
Multiple segments can be selected at once for batch editing of restrictions. Selecting multiple segments is done by clicking the segments while holding the Ctrl button (or Cmd on Mac computers).  [[Image:Restrictions multiple segments.gif]] A few things to note when editing multiple segments:* Note the directionality of the segments - two neighboring segments can be with different A->B directionality. In one of them the A->B direction can be eastbound and in the other it can be westbound at the same time.* When multiple segments are selected with different restrictions set on them, they will appear in a different section of the panel under Because the title: 'These restrictions only apply to some of the segments include private vehicles, any user that has selected:' Click the ‘Apply to all’ link to the right of the restriction line to propagate the restriction to all the selected segments. == Turns == When only certain turns are restricted from one segment to anothervehicle type, this method of restriction should ex taxi, will not be selected and not routed on the whole segment. === All turning traffic restricted at all times === Turns that Taxis are restricted to all traffic (all vehicle types) are set with '''turn arrows'''—the arrows that appear at the end not part of a selected segment. A restricted turn is indicated by a red arrow with a ''do not'' sign next to it. A turn that is open (not restricted) '''to all traffic''' is indicated by a green arrow. [[Image:Lotsa turns.jpg]] To change from a green arrow (open) to a red arrow (fully restricted) simply click on the arrow and it will toggle between the options.  {{NeedImage|Link to articles on the various turn arrow tips and tricks.}} {{NeedImage|Probably include something on U turns too.}} === Scheduled turn restrictions === When not all times, days, dates, or allowed vehicles so they are restricted from turning, you can set a scheduled turn restriction from one segment assumed to anotherbe prohibited. Turns that are restricted to all traffic during certain times of Remember the day are "time based turn restrictions". {{NeedImage|Insert photo Orange note in bottom left of Allowable restriction says "no left turn 7a-9a 4p-6pOther vehicles are restricted" sign or similar.}} Accessing the editing panel ? This is also accessed through the turn arrows. Select the desired turn arrow and click it until it becomes green. With the mouse hovering over the green arrow you will see a clock icon next to the arrow. Click on the clock to bring up the Time based restriction panel for that turn.  [[Image:Restriction arrow green.gif]] You should then see the Time based restrictions panel. [[Image:Turn-restriction-list-add-button-highlight.gif]] Press the "+ Add restriction" button to create a new restriction. See the section [[#Setting restrictions|Setting restrictions]] for information on how to set the restriction. Segment and turn restrictions are set using the same instructions covered below. You can create multiple restrictions for the segment to allow for restrictions that might only occur at different times of the day, or maybe the restriction is at different times on the weekdays than on the weekends. Once you enter the restriction(s) and press the Apply button, you will see a Yellow arrow instead of the green arrow indicating that turn has time based restrictions enabled.  [[Image:Restriction arrow yellow mouseovernote affects routing.gif]]
To access the edit panel for A user that turn, simply click the '''white''' clock selects avoid toll roads will not get routed here unless they signify that appears next they are HOV-2+ (once HOV is pushed to the yellow arrowproduction). If you only click on They have selected to avoid toll roads, but the yellow arrow, you will turn it red indicating all times, days, and vehicles are restricted. Note that your prior settings are saved and road is toll free if you click the red arrow again it will return to yellow with the last saved settingsthey have HOV-2+.
== Setting restrictions =Second pop-up window===The second pop-up window has the label of '''Add restriction''' in the top left corner.
Whether you are working ====Second pop-up window attributes====[[File:I-66E_AM_HOV.PNG‎|right|200px|border]]The second line will display '''Driving both ways (N/E/S/W/NE/SE/SW/NW if one way) on a [name of segment or turn restriction, choose the day of week, time of day, date range, and/or vehicle type to be ] is restricted (forbidden)on'''. Follow There are several attributes that can be selected for the guidelines below for each setting.restriction:#Applies to#Days#Hours#Applies #Restriction '''Type''' #Additional information text box
[[Image:Restrictions empty panel.gif]]
After configuring the restriction, press the '''Add''' button on that panel =====Applies to save =====[[File:Driving is.PNG‎|right|200px|border]]This section has two selections portion of the restriction segment and return to the Time based restrictions paneltype of special routing. Continue adding restrictions in the same way to cover combinations that may only restrict #Portion of segment selections are:#* a few hours per day, but at different times of day.) Entire segment#* b) Left lane#* c) Middle lane#* d) Right lane
=== Days Select the appropriate portion of week ===the segment. Note Waze can differentiate the speed difference between the lanes on a segment for the Bus/Express/FAST/HOT/HOV lanes that are separated by a dashed line from regular lanes. This does not work for the individual lanes on a road to tell you which lane is fastest when they are all the same type of road.
Select =====Specialty road type=====[[File:Specialty road type.PNG‎|right|200px|border]]This attribute is used to distinguish regular (none) road segments from #Specialty road type selections are:#* a) None#* b) Bus#* c) Express#* d) Fast#* e) HOT#* f) HOV#'''None''' is the designation for the days vast majority of roads; if a road does not have a specialty designation then it is a regular road and should have '''None''' selected.#The other designations of '''Bus''', '''Express''', '''Fast''', '''Express''', '''HOT''', '''HOV''' are used based on the local usage. The specialty road type has to be selected to get the week proper routing for that type of road. As of October 2017 there is no difference in the restriction designations, but there will eventually be activedifferent voice prompts for the various types; therefore set the road up with a consistent usage based on what the locals call the road type. Use #For the special designations '''Select allEVERY RESTRICTION LINE''' or on the segment should have the same specialty road type designation. If you have an HOV road that has one segment in the middle that is selected as '''Select noneNone''' link then the algorithm will not work properly.#When multiple segments have different orientations of A>B and B>A in one selection, they may have the restrictions saved in opposite directions. This is a bug that developers are working to fix. Till it is fixed then you should carefully check each segment to more quickly change all ensure the restriction is in the check boxesproper direction. The default For one way road segments if the restriction is all days of in the week. Your display order for opposite direction the days light orange dotted road will depend upon your country settings not be displayed; unfortunately two way road segments or one way road segments with multiple restrictions do not have a simple way to see that a restriction is in your browser and may not exactly match the image abovereverse orientation.
=== Time ==Days (of day week)===== [[File:Days selection.PNG‎|right|300px|border]]Select the applicable days of the week that the restriction will be active. Use the '''Select all''' or '''Select none''' link to more quickly change all the check boxes. The default is all days of the week. Your display order for the days will depend upon your country settings in your browser and may not exactly match the image above. '''Mon-Fri''' and '''Every day''' are the most common restriction groupings in USA.
=====Hours (of day)=====[[File:Clock entry.PNG|right|300px|border]]Select the applicable hours of the day that the restriction will be active. For restrictions that apply all day long, use the default setting of '''All day'''. If the restriction is for only certain periods of time during the day, then select deselect the '''FromAll day''' radio button to allow the time to be changed. You can click the hours or minutes fields to enter times directly, or click the clock icon next to the time to enable input panels. The schedule uses a 24-hour notation. The restriction will start at the beginning of the minute designated in the start block. The restriction will go till the 59th second of the minute designated; so if you state an end time of 08:00 it goes till 08:00:59. So if a posted restriction ends at 08:00 it is advisable to end the waze restriction at 07:59; this will have the 08:00 time enacted vice carrying the restriction over for an additional minute. If the end time is selected after 23:59 then the restriction will carry over till the next day.
{{:24-hour format}}
For example, a schedule of 10:00 AM to 3:00 PM is entered as 10:00 to 15:00; a schedule of midnight to noon (12:00 AM to 12:00 PM) is entered as 0:00 to 12:00. A schedule of 3:00 PM to 5:00 AM is entered as 15:00 to 05:00.
The time that should be entered is the local time of the road as on the local signs. The Waze server knows the local time zone and will schedule the restriction correctly.
Daylight savings time is automatically accounted for as long as the Waze client app is properly set to the correct local time. <!-- This is contradictory is to whether the server knows the local time or whether it uses the time from the app. -->
====== Entering midnight ======
If a scheduled restriction is between 8:00 PM and Midnight, then enter "20:00 - 23:59". Technically if you can also enter "20:00 - 00:00" it will go to get the same 00:00:59 but is more or less an equivalent result.
====== Crossing midnight ======
If a restriction occurs only during nighttime hours and opens in the morning, e.g., restricted between 10 PM and 5 AM, then enter the From time as 22:00 and the To time as 05:00. You will notice an information box that says the restriction will end of the following day. If this restriction is only on a certain day of the week, e.g., Saturday night and Sunday night, then select the day of the week for Sat and Sun matching the ''start'' of the restriction. There is no need to include Monday because it is automatically covered. Including the Monday check box would add a third day starting at 10 PM Monday.
=== Date range ==Applies (to dates)=====[[File:Date selection.PNG‎|right|300px|border]]The default setting is '''Every week''' meaning there is no limit to the date range so as soon as you add the restriction it will be active every week until it is removed. Optionally you can select the radio button for '''Range''' of dates to limit the restriction to a certain number of days. Press the button displaying the date to display two calendars. The one one the left shows the start date and the calendar on the right shows the end date of the restriction. Note these date are inclusive meaning the restriction will include both dates (and all the ones in between) when determining the restriction. When you have selected the date range press the green '''Apply''' button. The date range is displayed in '''DD/MM/YYYY''' format. To remove the date range, simply select the '''Every week''' radio button again.
[[Image:Restrictions dates selectorRemember that the end date will consider the entire day based on any time settings also configured. If the time crosses midnight, the next day will automatically be included for that time period and so that the restriction ends at the appropriate time.gif]]
=====Restriction types (Allowed/Toll free/Prohibited)=====This is where the three main '''Types''' of restrictions are selected that appear on the first pop-up window.[[File:Restriction Types.PNG|right|150px|border]]#The default setting is three Restriction '''Types''' are:#*'''Allowable'''#*'''Toll free'''#*'''Prohibited'''#Restriction '''Types''' are added as '''Lines''' under the applicable direction(s) of travel.[[File:Restriction Lines.PNG|right|200px|border]]#Restriction '''Lines''' contain '''Rules''' which are constructed here on the second pop-up window#Allowable restrictions have green backgrounds#Toll free restrictions have blue backgrounds#Prohibited restrictions have red backgrounds#Restriction '''Rules''' combine the type of vehicle, number of passengers required, and toll transponder/pass required#Remember#* a) Each restriction '''Every weekType''' meaning there on the first pop-up window is no limit compared to other Types as an '''AND''' statement.#* b) Each restriction '''Line''' on the date range so as soon as you add second pop-up window (within the restriction it will be active every week until it Type) is removedcompared to other lines in that restriction line as an '''OR''' statement. Optionally you #* c) Each restriction '''Rule''' within a single restriction '''Line''' is compared to other rules as an '''OR''' statement#Will use a toll free restriction to go over the various '''Rule''' types# Select '''toll free''' if there are vehicles that can select the radio button for travel without paying a toll '''Rangeand''' of dates there are some vehicles that have to pay a toll. If no vehicle type has to limit pay a toll then it is assumed that all vehicles are toll free and do not select toll free.#Note that the restriction 's background color should change to blue[[File:Driving_is_allowed_for_toll_free.PNG|center|500px|border]]#There are three categories to choose from for making a '''Rule'''#* a) '''Vehicle type'''#* b) '''Minimum passengers'''#* c) '''Requires a certain number of days. Press pass'''#The categories can be selected in any order #Select the button displaying applicable '''Vehicle type''' by clicking on the date '''+'''[[File:Toll free plus drop down.PNG|center|500px|border]]#'''Private car''' is added to display two calendarsthe restriction '''Line'''[[File:Toll free plus drop down. PNG|center|500px|border]]#The vehicle type can be changed by clicking on '''Private car''' bubble[[File:HOV vehicle type drop down.PNG|center|250px|border]]#Only one vehicle type can be selected per Restriction '''Rule'''#If no vehicle type is selected then Waze defaults to have the restriction applicable to all vehicles#If there is more than one vehicle type that needs a restriction then clilck '''Add a new rule''' and then the left shows '''+''' and '''Vehicle type''' till all applicable vehicles are added as a separate '''Rule''' in the one Restriction '''Line'''[[File:Three HOV rules.PNG|center|500px|border]]#Select '''Minimum passengers''' by clicking the start date '''+''' on the blue add restriction banner and a drop down menu will appear[[File:Toll_Free_initial_drop_down.PNG|center|500px|border]]#'''At least 2 passengers''' is added[[File:Toll_Free_Min_Pass_initial.PNG|center|500px|border]]#Select number of passengers required by clicking the calendar '''At least 2 passengers''' and a drop down menu will appear with selections for '''At least 3 (4) passengers'''[[File:HOV min passenger drop down.PNG|center|500px|border]]#If no minimum passenger restriction is selected then Waze defaults to have the restriction applicable to vehicles with any number of occupants# Click the '''+''' again while remaining on the right shows same restriction as the end date number of passengers to select '''Requires a pass'''# '''Alabama Freedom Pass''' is added to the restrictionline[[File:HOV Ala Pass. Note these date are inclusive meaning PNG|center|500px|border]]# Click the restriction '''Alabama Freedom Pass''' area and a drop down menu will include both dates (and all appear with available companies[[File:Toll free Transponder Pass.PNG|center|200px|border]]# Select the ones in between) when determining applicable transponder/pass#If no transponder/pass is selected then Waze defaults to have the restriction. When you have applicable to all vehicles even if no transponder/pass is selected in the date range press Navigation settings# Click '''Add''' button in bottom right corner of the green second pop-up window# Click '''Apply''' button. The date range is displayed in bottom right corner of the first pop-up window# Click '''DD/MM/YYYYSave''' format. To remove icon on the date rangegrey Waze bar#Remember for '''Toll free''' restrictions, simply the vehicles listed as toll free much be covered by the '''Allowable''' restrictions to have proper routing.#'''Allowable''' restrictions are set up similarly to '''Toll free''' restrictions; '''Allowable''' restrictions will have a green background[[File:Driving_is_allowed_for.PNG|center|500px|border]]#'''Prohibited''' restrictions can only select the '''Every weekVehicle type'''[[File:Prohibited restriction.PNG|center|500px|border]]#'''Prohibited''' restrictions have a red background#''' radio button againProhibited''' restrictions default to '''All vehicles'''#Select '''Only''' to be able to pick what vehicle type(s) will be prohibited#Note '''DO NOT''' select conflicting restrictions. For example selecting a segment as a toll road with an allowable restriction line of any vehicle with Sunpass and a prohibited restriction line for any taxi will not preform properly since there is no prioritization of restrictions. A user that has designated the vehicle is a taxi with Sunpass will meet both the allowable restriction and the prohibited restriction. Until the programming has prioritization this restriction should be written as a toll road with an allowable restriction line of any private car with Sunpass. Since the taxi is not an allowable restriction then all taxis will not be routed on the toll road. This means it does not matter whether the taxi has designated Sunpass is in the vehicle or not.
Again ====Understanding Restriction '''Line''' and '''Rule''' affects====#If there is more than one vehicle type that needs a restriction then clilck '''Add a new rule''' and then the end date will consider '''+''' and '''Vehicle type''' till all applicable vehicles are added as a separate '''Rule''' in the one Restriction '''Line'''[[File:Three HOV rules.PNG|center|500px|border]]#In the above picture the entire day based '''Rules''' are treated as '''OR''' statements; therefore read this restriction as to be toll free on this segment you must be either "Private car" OR "Taxi" OR "Motorcycle". So any time settings also configuredof the three vehicle types will meet the restriction. The first pop-up window looks like this:[[File:Three_HOV_rules_summary. PNG|center|500px|border]]#If you made three separate Restriction '''Lines''' with each having one '''Rule''' for "Private car"/"Taxi"/"Motorcycle], #*then you will have three separate HOV Restriction '''Lines'''. Below is a picture of one Restriction '''Line'''[[File:‎Single HOV restriction vehicle type.PNG|center|500px|border]]#In the time crosses midnight, above situation the next day will automatically '''Lines''' are treated as '''AND''' statements; therfore read these restrictions as to be toll free on this segment you must be "Private car" AND "Taxi" AND "Motorcycle". The user must be '''ALL THREE VEHICLE TYPES''' simultaneously; since only one vehicle type can be included for that selected at a time period it is impossible to ever meet this criteria.The first pop-up window looks like this:[[File:Improper HOV Restriction Lines.PNG‎|center|500px|border]]#Please take a second and then look at the last two examples to see how the restriction will no longer be active after that ending time'''OR''' and '''AND''' statements are aligned for '''Rules''' and '''Lines''' respectively.
=== Vehicle type =Multiple segments====Multiple segments can be selected at once for batch editing of restrictions. Selecting multiple segments is done by clicking the segments while holding the Ctrl button (or Cmd on Mac computers).
'''A few things to note when editing multiple segments:* Note: While the map editor directionality of the segments - two neighboring segments can be with different A->B directionality. In one of them the A->B direction can be eastbound and in the other it can be westbound at the database support vehicle type restrictions alongside same time .* When multiple segments are selected with different restrictionsset on them, this not true they will appear in a different section of the routing engine and mobile app. The Waze routing engine currently supports panel under the title: 'These restrictions only apply to some of the segments selected:' Click the "Private vehicle" and "Taxi" types; all other vehicle types are not currently supported. The vehicle type restrictions are available anticipating ‘Apply to all’ link to the release right of this functionality the restriction line to propagate the routing engine and restriction to all the appselected segments.'''
'''However, setting up vehicle type restrictions is an important activity, as the feature cannot be turned on in the app until the map has records of most vehicle type restrictions. It will be useless, and give a false sense of confidence to drivers, to enable vehicle-type based routing if the map can't adequately support the feature due to lack of data.'''== Turns ==
There Time Based Turn Restrictions (TBTRs) are some situations that used when certain turns are partially restricted from one segment to another. If the turn is always restricted for all vehicles then use a red turn restriction; TBTRs are not to be set to 24/7 for all vehicles. TBTRs are used to only restrict certain hours, days, dates, and/or certain vehicle types from passing through the turn or segment. Examples of this include no truck zones.
{{NeedImage|Insert some photos of real-world signs.}}=== Turn restrictions ===
Also, some turns may be taken Turns are set up for traffic flow or restricting traffic are set with '''turn arrows'''—the arrows that appear at the end of a selected segment. A restricted turn is indicated by no traffic a red arrow with a red ''exceptdo not'' certain vehiclessign next to it (upper left arrow in picture below). Examples of this include HOV lanes, bus stops, and truck-only exit rampsA partially restricted turn (TBTR) is indicated by the yellow arrow (lower right arrow in picture below). For example, for an HOV-2 A turn that is open (not restricted road, you might check ) '''to all vehicle types except public transportationtraffic''' is indicated by a green arrow. For two way segments, HOVthere are u-2turn arrows that follow the same color indications. Hover over either a green or yellow arrow and a grey box pops up with that particular turn's turn instruction override selection, HOV-3the turn restriction selection, and motorcyclesthe difficult turn attribute selection (upper right arrow in the picture below). Above the grey box is a label for turn to name of segment (if named) or "no street" (if unnamed).
{{NeedImage[[File:Lotsa turns5.png|Insert some more photos.}}500px|center]]
The default condition is '''All vehicle types''' are included in the restriction, but if only certain vehicles are going to be restricted, press the '''(Edit)''' link next to '''Restriction for all vehicle types''' to bring up the vehicle type selector.=== Scheduled turn restrictions ===
[[Image:When not all times, days, dates, or vehicles are restricted from turning, you can set a scheduled turn restriction from one segment to another. Turns that are restricted to traffic during certain periods are "time based turn restrictions". Restrictions vehicle typescan either prohibit or allow vehicles by time, day, date, or type.jpg]]
Add a check mark only the vehicles that are not permitted during the restriction period and leave the other types unchecked. Use the '''Select all''' or '''Select none''' link to change all the check boxes[[File:DC TBTR example1. PNG|center|300px|border]]
[[File:TBTR hover4.PNG‎|right|150px|border]]To enter a TBTR:# Select one segment# Hover over a '''GREEN''' or '''Yellow''REMEMBER' turn restriction arrow# Grey box appears[[File: These are <u>TIO drop down.PNG|150px|right]]#* a) "VOICE PROMPT" for the [[Turn_instruction_override|Turn override instruction]] is listed on top#* b) "RESTRICTIONS" for the TBTR is listed in the middle#* c) "DIFFICULT TURN" for the Difficult turn (DT) attribute is listed on the bottom# Click the "Waze Selected" area to select a turn instruction override and a drop down menu appears# Click the "Add restrictions (or Edit restrictions</u>)" icon to add a TBTR and a popup window appears. The #* a) If "Add restrictions" is selected vehicle types then a popup window goes directly to TBTR attributes[[File:First TBTR pop up.PNG|center|300px|border]]#* b) If "Edit restrictions" is selected then a popup window with a summary of existing TBTR(s) is displayed; click the '''Add new''' radio button to get to the attribute popup window where you can add another TBTR[[File:TBTR Summary Popup.PNG|center|300px|border]]# Click "Yes" to select the DT attribute or "No" to deselect the DT attribute; the [[Partial_restrictions#Difficult_turn|Difficult Turn]] is described below# Click '''Save''' icon on the grey Waze bar to save any changes {{mbox|text=''If the turn restriction is part of a junction box and there is one or more alternate route within the junction box, then a '''SWITCH ROUTE''' line will be restrictedappear between the restrictions and difficult turn lines. The unselected vehicle types will be admittedPlease see [[Junction_box#Switch_route_selection|Switch route selection]] for description of this feature.''}}
{{Red|NOTE:}} The Waze client app does not differentiate between different vehicle types, so these settings do not have any effect on routing.
=== Text Description =TBTR pop-up window attributes====[[File:Second TBTR Popup.PNG‎|right|200px|border]]The second line will display '''Turning from [original segment] to [destination segment] is restricted on'''. There are several attributes that can be selected for the restriction:#Days#Hours#Applies #Restriction '''Type''' #Additional information text box
Leave a description for =====Days (of week)=====[[File:Days selection.PNG‎|right|300px|border]]Select the nature applicable days of the week that the restrictionwill be active. If Use the '''Select all''' or '''Select none''' link to more quickly change all the restriction check boxes. The default is all days of the result of signs or markings, make note of thisweek. If Your display order for the restriction is days will depend upon your country settings in your browser and may not exactly match the result of construction or road work, leave details about image above. '''Mon-Fri''' and '''Every day''' are the closuremost common restriction groupings in USA.
{{Red=====Hours (of day)=====[[File:Clock entry.PNG|right|NOTE:}} There 300px|border]]Select the applicable hours of the day that the restriction will be active. For restrictions that apply all day long, use the default setting of '''All day'''. If the restriction is for only certain periods of time during the day, then deselect the '''All day''' radio button to allow the time to be changed. You can click the hours or minutes fields to enter times directly, or click the clock icon next to the time to enable input panels. The schedule uses a 10024-character limit hour notation. The restriction will start at the beginning of the minute designated in the Description fieldstart block. Entering more than that The restriction will result in go till the 59th second of the minute designated; so if you state an end time of 08:00 it goes till 08:00:59. So if a "General Error" upon trying posted restriction ends at 08:00 it is advisable to saveend the waze restriction at 07:59; this will have the 08:00 time enacted vice carrying the restriction over for an additional minute. If the end time is selected after 23:59 then the restriction will carry over till the next day.
== Examples =={{:24-hour format}}
The following examples cover specific situations For example, a schedule of 10:00 AM to 3:00 PM is entered as 10:00 to 15:00; a schedule of midnight to noon (12:00 AM to 12:00 PM) is entered as 0:00 to provide more guidance12:00. Some A schedule of the examples below will be turn based restrictions, but the method 3:00 PM to 5:00 AM is the same for the segment restrictionsentered as 15:00 to 05:00.
=== Date range results ===The time that should be entered is the local time of the road as on the local signs. The Waze server knows the local time zone and will schedule the restriction correctly.
The following table includes example date range combinations and Daylight savings time is automatically accounted for as long as the resulting restrictions that it would generate:Waze client app is properly set to the correct local time.
{||-|'''Days of the week'''|'''Time Range'''|'''Date Range'''|'''Restriction Result'''|-|Sunday|All day|12.1.2014 - 12.31.2014|Every Sunday on December 2014, from 00:00 until 23:59:59.|-|Monday - Friday|09:00-11:00|Every Week|Every weekday from 9am to 11am.|-|Thursday|23:00-03:00|Every Week|Every Thursday from 23:00 until every Friday at 03:00|-|All|All day|7.3.2015 - 7.15.2015|From July 3rd 2015 at 00:00 until July 15th at 23:59:59|}======Entering midnight======
=== Simple time based restrictions ===If a scheduled restriction is between 8:00 PM and Midnight, then enter "20:00 - 23:59". Technically if you enter "20:00 - 00:00" it will go to 00:00:59 but is more or less an equivalent result.
For a turn or segment that is restricted (not allowed) between 10 am and 2 pm daily, click the radio button next to "From", then enter "10:00" and "14:00" as the start and end times of the restriction.======Crossing midnight======
[[Image:Restrictions 10-14.jpg]] Click "Add" to add the If a restriction. You will be returned to the Time based restrictions panel. The panel should now reflect the added restrictions. [[Image:Restrictions list 10-14.jpg]] For a turn that is restricted between 7 occurs only during nighttime hours and 9 am, and again between 4 and 6 pm, add opens in the restrictions one-by-one as instructed above. When addedmorning, the panel should look like thise{{NeedImage|Insert image of panel with 7-9 and 16-18 restrictions added - n peters to bienville exampleg.}} ==== Overnight time based turn restrictions ==== Time-of-day restriction periods may cross midnight. For a turn that is , restricted between 8 pm 10 PM and 6 am5 AM, then enter the From time as 2022:00 and the To time as 605:00. {{NeedImage|Insert image You will notice an information box that says the restriction will end of panel with 20-23:59 and 0-6 restrictions added - bourbon street examplethe following day.}} === Date-based turn restrictions === Some restrictions may also If this restriction is only be in place on a certain days day of the week. For a turn that is restricted "weekends", check only the boxes for "Sat" and "Sun"e[[Image:Restriction SatSun onlyg.jpg]] === Time-, Saturday night and-date-based turn restrictions === For a turn that is restricted "2 pm to 4 pm, weekdays"Sunday night, when adding then select the restriction, uncheck day of the boxes next to "week for Sat" and "Sun", and enter "14:00" and "16:00" in matching the ''start'' of the time boxesrestriction[[Image:Restriction m-f 14-16There is no need to include Monday because it is automatically covered.jpg]] === Time-of-year and holiday turn restrictions === Some restrictions may only be in place during certain times of year. If on Including the Monday check box would add a specific date and time, set the appropriate combinationthird day starting at 10 PM Monday.
At this time, =====Applies (to dates)=====[[File:Date selection.PNG‎|right|300px|border]]The default setting is '''Every week''' meaning there is no way limit to schedule a yearly repeating holiday the date range so as soon as you add the restriction. You must enter each year manually. Adding more than one year at a time may it will be helpfulactive every week until it is removed. For example, adding a minimum of two years at a time would mean that Optionally you doncan select the radio button for '''Range''t need to "remember" ' of dates to go back to edit in limit the next restriction right away, or 5 sets of restrictions (to cover 5 years) would make it unnecessary for quite a long timecertain number of days. Unfortunately, there is no simple way Press the button displaying the date to even manually update an existing date range from display two calendars. The one one year to the next; you must effectively recreate left shows the exact start date and the calendar on the right shows the end date of the restriction. Note these date are inclusive meaning the restriction will include both dates for each year(and all the ones in between) when determining the restriction. When you have selected the date range press the green '''Apply''' button. The date range is displayed in '''DD/MM/YYYY''' format. To remove the date range, simply select the '''Every week''' radio button again.
=== Reversible road ===Remember that the end date will consider the entire day based on any time settings also configured. If the time crosses midnight, the next day will automatically be included for that time period and so that the restriction ends at the appropriate time.
Reversible roads =====Restriction types (Allowed/Prohibited)=====This is where the two main '''Types''' of restrictions are roads whose travel selected that appear on the first pop-up window.[[File:Restriction types1.PNG|right|150px|border]]#The two restriction '''Types''' displayed are:#*'''allowable'''#*'''prohibited'''#Restriction '''Types''' are added as '''Lines''' under the applicable direction depends of turning.[[File:TBTR lines.PNG|right|200px|border]]#Restriction '''Lines''' contain '''Rules''' which are constructed here on the time second pop-up window#Allowable restrictions have green backgrounds#Prohibited restrictions have red backgrounds#Restriction '''Rules''' combine the vehicle type allowed and/or prohibited#Allowable and Prohibited rules have different ways of day, selecting vehicle types; most editors will use one or the other restriction type but not both.#Remember#* a) Each restriction '''Type''' on the first pop-up window is compared to other Types as an '''AND''' statement.#* b) Each restriction '''Rule''' on the second pop-up window (within the '''Allowable''' restriction Type) is compared to other vehicle type(s) in that restriction line as an '''OR''' statement.#Note that the restriction's background color should change to red for prohibited and green for allowed#Select the applicable Allowed '''Vehicle type''' by clicking on the '''+'''[[File:TBTR allowable drop down.PNG|center|500px|border]]#'''Private car''' is added to the restriction '''Line'''[[File:TBTR allowable private car.PNG|center|500px|border]]#The vehicle type can be changed by clicking on '''Private car''' bubble[[File:TBTR allowable private car drop down.PNG|center|250px|border]]#Only one vehicle type can be selected per Restriction '''Rule'''#If no vehicle type is selected then Waze defaults to allow have the restriction applicable to all vehicles#If there is more lanes of travel into or out of than one vehicle type that needs a restriction then click '''Add a new rule''' and then the '''+''' and '''Vehicle type''' till all applicable vehicles are added as a city separate '''Rule''' in order the one Restriction '''Line'''[[File:TBTR allowable two veh types.PNG|center|500px|border]]# Click '''Add''' button in bottom right corner of the second pop-up window# For '''Prohibited''' restrictions you get to handle enter one '''Rule''' and mark all the additional prohibited vehicle load during rush hourstypes at the same time in the same rule.[[File:TBTR prohibited.PNG|center|500px|border]]#'''Prohibited''' restrictions default to '''All vehicles'''#Select '''Only''' to be able to pick what vehicle type(s) will be prohibited#Note '''DO NOT''' select conflicting restrictions. There is no prioritization of the restrictions which is why it is advisable to only use Allowed '''OR''' Prohibited TBTRs but not both together on the same turn.# Click '''Add''' button in bottom right corner of the pop-up window# Click '''Apply''' button in bottom right corner of the TBTR summary pop-up window# Click '''Save''' icon on the grey Waze bar
On the Waze map, a reversible road is set up as a 2-way road, and then the allowed travel directions are set up as restrictions. This is a bit tricky because Waze uses the idea of ''restrictions,'' which is the opposite of ''allowed.'' For example, say a road allows travel northbound only between the hours of 6AM to 11AM. Those are the allowed hours of travel that direction. In the Waze restrictions setup, we would have to ensure that travel in that direction is ''restricted from 11:01AM to 5:59AM.''=== Difficult turn ===
==== Reversible roads with vehicle type restrictions ====This setting tells the routing server to add a [[routing penalty]] to the turn, meaning when calculating the time to reach the destination, this turn will include extra time so that other routes are more likely to be selected if this turn is only marginally better than another nearby route. The user enables this option by selecting "Reduce difficult intersections" within the "Navigation" section of the "Settings".
Some reversible roads A turn can be considered difficult for many reasons including but not limited to the following:<br />:'''Heavy traffic''':* Turn left across traffic that may be continuously flowing or fully stopped and into traffic that may also be restricted to certain vehicle typescontinuously flowing or stopped.:* Turn right into traffic that may be continuously flowing or fully stopped. A common example of this is :'''Poor visibility''':* Turn (left or right) into quickly moving traffic with poor visibility from:::* a crest in the reversible HOV lane.road::* a sharp corner::* an obstacle
Some cities have reversible roads set up that are also HOV lanes. Two examples are in Seattle and are A turn can be identified as difficult by ''''multiple'''' drivers submitting [[URs]] or by the I-90 and I-5 Express Lanes. These lanes reverse travel direction depending on the time direct knowledge of day, but these lanes are also HOV lanes, so you aren't allowed on them unless your vehicle meets the requirementseditor.
Below are the current setup Do not put a DT in for the I-5 Express Lanes in Seattle, WA, based on [httpfollowing situations:#If the poor visibility turn is the only valid way into the segment (The DT will not affect routing and should be omitted)#A left/right turn at a traffic light#A left/www.wsdot.wa.gov/Northwest/King/ExpressLanes/Weekdays.htm the published schedules] by the Washington Department right turn where there are stop signs at all paths of Transportation.travel#A left turn where there is a dedicated left turn lane even if left turn lane is not an at-grade connector (AGC) (car is protected and if time to turn is long algorithm will pick up)
[[Image:I-5 express seattle Consult with your State Manager to see if there is any criteria for when to add a-b restrictions listdifficult turn. Overuse of difficult turns will significantly affect routing. Entering difficult turns on every left turn along a stretch of the road negates the attribute's intention since all have the same penalty. This would cause a much longer route with several right turns around an area to come back to the destination or have it so that each turn is equally penalized, which is the same as no turns being penalized.jpg]]
[[Image:I-5 express seattle b-Some regions or states may even have typical times for difficult turns to be added during rush hour, that may be similar a locality's no turn restrictions list.jpg]]
While the WSDOT webpage is very simple what the schedule is, only having two entries, to translate that into restrictions is much more complicated.==== Adding/editing a difficult turn ====
{{ReturnTo Difficult turns are recognizable by the lined shading on either allowable turn restrictions (green arrows) or time-based turn restrictions (yellow arrows) whether through a node or a [[junction box]].[[File:DT striping TRs.PNG‎| Editing manual center| the editing manual}}200px|border]]
To add a difficult turn restriction:[[File:Difficult turn pop1.PNG‎|right|200px|border]]
* Hover over any green or yellow turn arrow for the first turn interface pop up (gray box) to appear
* Select the '''DIFFICULT TURN''''s Yes attribute
* If it is not desired to have a 24/7 penalty applied for the difficult turn, then click the white clock icon to the right of '''Yes'''
* The second turn interface pop up (Edit restriction) will appear[[File:Difficult turn pop3.PNG‎|right|200px|border]]
* Add the time, day, or date restriction similar to the [[Partial_restrictions#Scheduled_turn_restrictions|TBTR instructions]] above
* If there is already a restriction either
*# Click the '''Add new''' radio button to add another restriction
*# Click the '''>''' at the right of the existing restriction line to modify the current restriction
*# Click the '''trashcan''' to delete the current restriction (just to the left of the > when you hover over the area)
[[File:Difficult turn pop4.PNG‎|center|400px|border]]
After a DT has a TBTR set then the display changes to have a blue background on the clock.[[CategoryFile:Pages Needing AttentionDT pop TBTR set3.PNG‎|right|200px|border]]
1,236
edits