Changes

From Wazeopedia

User:Subs5/HOV

5,895 bytes added, 1 year ago
m
redirects
Items for HOV wiki would expect to link [[High Occupancy Vehicle ]] with [[HOV]], [[High Occupancy Toll]], [[HOT]], [[Express Lanes]]. [[Clean Air Vehicle]]
==High Occupancy Vehicle (HOV) ==
 
{{mbox|type=important|text= '''Note''' Until HOV and toll transponders are pushed to production you have to be careful to not adversely affect the production app users. If you haven't mapped the HOV lanes then probably best to just set up for HOV. If HOV lanes were already set up so that people can use HOV if they drive over the first segment then you can set it up to continue. Have the first segment set up properly using HOV allowed restriction and then add private vehicle and taxi to all the subsequent segments. If you have a toll road that only allows transponders then setting up for transponder use will prevent all production app users. Add private vehicle and taxi to all segments till transponders are pushed to production.}}
 
===Intro===
Waze has HOV routing! This feature puts Waze out in front of the other navigation systems, but we need to know how to properly configure the map for a great user routing experience. There are a lot of considerations for getting all the options properly included, ; warnings about bugs and some not so please take your time and read it through the entire article prior obvious requirements are discussed (ex. allowable restrictions need to editingcover all toll free restrictions). If you have questions, then please reach out to your State Manager or Regional Coordinator and we’ll get you some help.
===Definitions===
====HOT====
HOT – High Occupancy Toll. This is a combination of toll road and HOV. Sometimes called “Lexus Lanes” since people can buy their way onto roads with less congestion. Electronic toll roads often require a special transponder set to HOV which mode, when there are enough people in the car in order to drive toll-free. The transponder then broadcasts that the car meets the HOV requirements so that a toll is not charged.
====Express Lanes====
====Clean Air Vehicle====
Clean Air Vehicles – '''future feature''' These vehicles meet the requirements for low emissions for the state that the person is operating the vehicle. The vehicles are normally either a hybrid or electric or natural gas vehicle. '''Note''' some states require special permits or license plates to qualify. States that have a decal to allow holders to use HOV lanes should be listed in the Transponder/Pass list.
===Toll attribute===
[[File:Toll_attribute_box_checked.PNG|right|300px|border]]
The toll attribute has moved from under the road segment name to the first popup page of a Time Based Segment Restriction (TBSR). It is in the bottom left corner of the first TBSR popup window.[[File:New toll.PNG|right|150px|border]]Mark a road segment as a toll segment only if the segment has a toll booth, transponder reader, or other tolling deviceand if no vehicles travel as toll free on that segment. See [[User:Subs5/Toll_road|Toll road]] for additional information.
Two There are two ways to mark toll:# Toll attribute in bottom left corner of the first TBSR popupwindow# Toll free restriction is enabled in second TBSR popupwindow
{{mbox|type=important|text= '''Note''' if there is not a restriction then '''{{button|format=bold|bgcolor=#FCE5A1|Add restrictions''' }} is shown; if there are TBSRs , then '''{{button|format=bold|bgcolor=#FCE5A1|Edit restrictions (#)''' }} is shown.}}
* Once a segment is selected marked as a having the toll segmentattribute on the first TBSR popup window, the toll attribute is displayed under the road segment name. You have to go to the TBSR to deselect the attribute. Additionally the toll free restrictions can not be added if the segment is marked with the toll attribute.
* If at least one restriction is marked toll free, then it is assumed that all other vehicles not meeting the toll free requirements has have to pay a toll.
{{mbox|type=important|text= '''Note''' the toll attribute is not shown on the segment if toll free is selected, but it is assumed that there is a toll for the other vehicles.}}
*The '''Next to carpool/HOV/bus lane''' attribute is under the road type selection when a segment is selected
*'''DO NOT SELECT''' this attribute on the actual HOV road segments. Especially for road segments that have regular and HOV lanes on the same segment. (i.e. the segment has an HOV in left or right lane that is separated by dashed line.)
*Ensure Select the Next to carpool/HOV/bus lane attribute is selected on all parallel road segments going the same direction as the HOV traffic that are within (XXX feet) of an HOV segment. {{needInfo|'''Note subs5 find out if ramps also need to be designated'''}}
{{mbox|type=important|text= '''Note''' for reversible HOV lanes there may be road segments on both sides of the HOV lane that require the Next to carpool/HOV/bus lane attribute to be checked.}}
===Toll Transponder Companies supported===
The following companies’ toll transponders are supported in WazeWME, they are listed alphabetically in the app:[[File:TranspondersTransponder R1.PNG‎|right|200px|border]]
#Sunpass
#FlexpassTollTag#TxDOTTolltagHOV Smart Pass#LeewayPeach Pass#ONC Quick Pass -E-ZPass#Metro HOT Lanes Toll Tag#Alabama Freedom Pass#PIKEPASS#GeauxPass#RiverLink#NationalPass#NPS America the Beautiful#PayTollo#Palmetto Pass#E-ZPass#FasTrak Flex#EZ TAG#Riverlink - E-ZPass#LeeWay#FAST
#NC Quick Pass
#PeachpassGood To Go! Flex Pass#METROHOTtagClean Pass#Hatem Brg E-ZPass#CAV decal
#NEXUS
#K-TAG
#PIKEPASS#Fastrak#GeauxPassFasTrak#Good To Gous:Express Toll#RiverLinkGo!
#E-Pass
#I-Pass
#Pay BY PLATEMnPAsS#TxTAGTolltagSENTRI#DallasNTTATolltagExpressToll#Palmetto PassTxTag#E-ZPass (E-ZPassFlex - see if can get Flex added separately for HOV routing)#HarrisEZtagSingle Facility / Road Pass
===How to map HOV lane segments===
====Enter/exit anywhere HOV====
*HOV lanes that can be accessed or exited the entire time since drivers can cross the dashed line (or some areas a single solid white line) separations at any time. Usually the lane with will be noted marked with the white triangle diamond painted on the road way roadway and have regulatory signs on the shoulder. Example is US-95 HOV in Las Vegas, NV.
[[File:HOV_Diamond_and_sign.PNG‎|left|200px|border]][[File:HOV US95 LV.PNG|200px|border]][[File:I66_E_outside_beltway.PNG‎|right|200px|border]]
'''Bottom line up front - The HOV lane is mapped on the same segment(s) as the regular lanes.'''
{{mbox|type=important|text= Remember '''DO NOT''' mark any road segment(s) with HOV lane(s) using the 'Next to carpool/HOV/bus lane ' attribute.}}
# Map the applicable road segment(s) for the road
# HOV restrictions are added per the restrictions section below
{{mbox|type=important|text= '''Note''' even Map if HOV lanes allow motorcycles, are allowed by adding them as an allowed restriction. Note that does not need to be mapped since until motorcycle is not an allowed a supported vehicle type for Waze routing. The , the motorcycle user should just indicate that they meet the HOV requirement(s).}}
====Limited enter/exit (transition zone) HOV====
*[[File:US-50_E_double_solid_line.PNG|right|250px|border]] Separated by solid or double solid lines from the normal lanes with periodic transition zones. Non-HOV travel is available on an adjacent parallel path (lane or segment).:Note for areas where it is legal to cross the single solid white line refer to [[#Enter/exit anywhere HOV|Enter/exit anywhere HOV section ]] above.[[File:US-50_E_double_solid_line.PNG|right|250px|border]]Non-If all of the highway entrances and exits are accessible to the HOV travel lane, then there is available on an adjacent parallel path (lane or segment)no functional difference to the routing that these lanes have restricted access. Waze will only route on You should also map this road if the person acknowledges that they meet the type of HOV requirement for this trip. Example using simple lane restrictions on a single set of segments as is '''need location done with this set up'''[[#Enter/exit anywhere HOV|Enter/exit anywhere HOV lanes]].
Waze will only route on this road if the person acknowledges that they meet the HOV requirement for this trip. When HOV routes are available they will see this display.[[File:HOV_ROUTES.PNG|center|250px|border]]
 
The user then would select a route that designates how many passengers are required.
[[File:New HOV symbol.PNG|center|250px|border]]
'''Bottom line up front: separate road segment(s) for the HOV with transition zone to/from regular lanes using ramps'''
# Add ramps for the transition zone as follows:
* Add a set of entrance/exit ramps to make a V at the entrance to HOV lanes
** Add a ramp with '''to [Road name/Route number] HOV''' coming from the regular lanes to the start of the transition zone (Prompts user to enter the HOV lane). **:Ramp should be about 6have an approximate angle of 20-7 m long 30° and flow traffic into the HOV lane at the start of the transition zone (start of dashed white lines).** Add :The ramp should have no name, unless there is a ramp [[BGS]] with '''to Return to [Road additional information other than the road name/Route number] Regular Lanes''' , restrictions, and transponders.** Add an exit transition ramp from the start of the transition zone (Prompts user to exit HOV lane either for upcoming exit or if traffic is faster in regular lanes). Ramp **:The ramp should originate at the start of the transition zone and be about 6have an approximate angle of 20-7 m long30° leading back onto the regular lanes.**:The ramp should have no name, unless there is a [[BGS]] with additional information other than the road name, restrictions, and transponders. * Only if the zone is over 0.5 miles ''(805 meters)'' long; Add another set of entrance/exit ramps following the above style to make a V at the end of the transition zone, if the zone is over 0.5 miles/xxxx meters long** Add a ramp with '''to [Road name/Route number] HOV''' coming from the regular lanes to flowing into the HOV lane at the end of the transition zone (Prompts user to enter the HOV lane). Ramp should be about 6-7 m long and flow traffic into ** Add a ramp from the HOV lane at the end of the transition zone (start of solid white lines).** Add a ramp with '''to Return to [Road name/Route number] Regular Lanes''' , flowing into the regular lanes (Prompts user to exit HOV lane either for upcoming exit or if traffic is faster in regular lanes). Ramp should originate at the end of the transition zone and be about 6-7 m long.
* For a very long transition zone, other set(s) of entrance/exit ramps to make a V can be added every 0.5 miles/xxxx meters
{{mbox|type=important|text= '''Note''' even if HOV lanes allow If motorcyclesare allowed, map the rule by adding them as an allowed restriction. Note that does not need to be mapped since until motorcycle is not an allowed a supported vehicle type for Waze routing. The , the motorcycle user should just indicate that they meet the HOV requirement(s).}}
====Separate parallel segment HOV====
HOV only on the separate road segment; separated by a physical distance from the normal lanes (ex. land, curbs, shoulders), a concrete barrier, or a flexible barrier from the normal lanes. Non-HOV travel is available on an adjacent parallel path (lane or segment). Waze will only route on this road if the person acknowledges that they meet the HOV requirement (and transducer transponder if required) for this trip. Example is I-395 by the Pentagon (Arlington, VA).
'''Bottom line up front: separate road segment(s) for separate parallel HOV'''
Follow the general guidance above for [[#Limited enter/exit (transition zone) HOV|Limited enter/exit (transition zone) HOV]] lanes as applicable:
# Map the applicable regular lane road segments
# Map parallel road segments for HOV lanes
# HOV restrictions are added per the restrictions section below
{{mbox|type=important|text= '''Note''' even Map if HOV lanes allow motorcycles, are allowed by adding them as an allowed restriction. Note that does not need to be mapped since until motorcycle is not an allowed a supported vehicle type for Waze routing. The , the motorcycle user should just indicate that they meet the HOV requirement(s).}}
====Whole road HOV====
All travel is HOV only on the road. Non-HOV travel is not available on an adjacent parallel path (lane or segment). Waze will only route on this road if the person acknowledges that they meet the HOV requirement (and transducer transponder if required) for this trip. There are not very many implementations of this type of set up. Example is I-66 inside the beltway in Northern Virginia; morning rush hour traffic is HOV-2+ only for eastbound traffic.
'''Bottom line up front: separate road segment(s) for whole road HOV'''
# HOV restrictions are added per the restrictions section below
{{mbox|type=important|text= '''Note''' even Map if HOV lanes allow motorcycles, are allowed by adding them as an allowed restriction. Note that does not need to be mapped since until motorcycle is not an allowed a supported vehicle type for Waze routing. The , the motorcycle user should just indicate that they meet the HOV requirement(s).}}
===Entering HOV restrictions===
 
{{mbox|type=important|text= '''Warning''' There is a bug the will reverse the Toll free/Allowed/Prohibited restrictions if too many are selected and they are not all aligned A-B or B-A. You can select two segments and the restriction will be properly aligned even if A-B on one and B-A on the other. It is fairly obvious if editing one way segments since the restriction coloration will not show on the segment if the other direction has the restriction. If editing two way segments (i.e. reversible road segments) then it is recommended that each be reviewed so that you don't break the routing.}}
 
{{mbox|type=important|text= '''Note''' - '''ALL''' segments need to have the HOV/HOT/Express restrictions marked. This is required for the HOV algorithm to work. Do not just mark the entrance segment. Follow current guidance for mapping toll segments only where there is a toll booth, toll transponder, or other collection device. If there is any toll free travel then '''ALL''' segments need the toll free restriction. The HOV/HOT/Express/Bus/etc will be used for voice prompts in the app soon. It is best to have them all the same; make sure that none is not inadvertently selected since that will adversely affect routing.}}
 
{{mbox|type=important|text= '''Note''' Restrictions for Toll free/Allowed/Prohibited are treated as AND conditions when comparing the separate lines on the first popup window. Within in a single restriction type on the second popup window, the various restrictions are treated as OR conditions. So saying that private vehicles with HOV-2+ and taxis are allowed will route either type of vehicle '''IF''' in the same restriction (on the second popup window). If they are entered as two separate restrictions on the first popup window then nothing will be routed since you have to simultaneously be both a private vehicle with HOV-2+ and a taxi; this is not possible.
If something is an allowed restriction then only that type of condition(s) can pass on the road, all others are considered to be prohibited
Do not use conflicting restrictions - ex all vehicles with Sunpass are allowed but taxis are prohibited. A taxi can have a Sunpass and the algorithm is not set up to have a preference or hierarchy yet, so improper routing can happen.}}
 
====Enter/exit anywhere HOV====
{{mbox|type=important|text= '''Note''' '''ALL''' segments need to have the HOV restrictions marked. Do not just mark the entrance segment. Follow current guidance for mapping toll segments only where there is a toll booth, toll transponder, or other collection device. The toll guidance is being verified with staff since unknown if requirements changed.}}
To mark a segment for HOV use including the required number of passengers:
# Select the applicable road segment(s), see Warning above# Click the '''{{Button|format=bold|bgcolor=#FCE5A1|Add restrictions''' }} button in the sidebar , and receive the first restriction popup. [[File:Restriction_first_popup.PNG‎|center|250px|border]]# If no toll is required for HOVthe segment, then skip to step 5# If a toll is required for all vehicles including HOV vehicles, then select the '''toll attribute''' in bottom left corner (ex. I-93 N's HOV / Express to Airport / S Station in Boston, MA), # Click the '''add {{Button|format=bold|Add new''' }} button at the bottom of the appropriate direction ('''A>B''', '''B>A''', or '''TWO WAY''') on the popup screen.# Second restriction popup screen appears. [[File:Applies_to_box.PNG|center|500px|border]]# Select appropriate '''Left lane/Middle Center lane/Right lane''' in the '''Applies to''' section . # Select '''HOV''' in the '''Applies to''' section. If locals call the lane one of the other options, then use that HOT/Express/Bus/etc, but one must be used and it should be consistent for the run of the road. May transition to another type if HOV changes to Express
# Select appropriate '''Days''' HOV restrictions apply
# Select appropriate '''Hours''' for time-based HOV or leave '''all day''' checked for 24-hr HOV lanes
# Ensure '''Every week''' is selected for normal use; Note '''Range''' can be used for planned time shifts between summer/winter or for holiday changes particularly on reversible segments
# '''Driving is _____ for'''[[File:Driving_is_allowed_for.PNG|center|500px|border]]
# Select '''allowed''' for HOV vehicles
# Click the '''{{Button|format=bold|bgcolor=#AAE2C0|style=border-radius:.95em;| +'''  }} on the green add restriction rule banner and a drop down menu will appear [[File:Requires Pass Veh Type Min Pass.PNG|center|500px|border]]
# Select '''Minimum passengers''' from the menu
# Default HOV allowance of '''At least 2 passengers''' appears[[File:Num_passengers_dropdown.PNG|center|500px|border]]# If more passengers are required to meet the HOV eligibility, then click the '''{{Button|format=bold|bgcolor=#AAE2C0|style=border-radius:.95em;|At least 2 passengers''' }} and select the appropriate number from a drop down menu that appears ('''At least 3 passengers''' or '''At least 4 passengers''')# If a transponder or tag is required to use the HOV for either certifying the appropriate number of people are present or to pay the toll, click the '''{{Button|format=bold|bgcolor=#AAE2C0|style=border-radius:.95em;| +'''  }} while remaining on the same restriction line and select '''Requires a pass'''# Default transponder of '''Sunpass''' is added to the restriction line[[File:Subscription_dropdown.PNG|center|500px|border]]# If another transponder is required, then click '''{{Button|format=bold|bgcolor=#AAE2C0|style=border-radius:.95em;|Sunpass''' }} and a drop down menu will appear with available companies, and passes# Select the applicable transponder company , pass, or permit # If a particular vehicle type is required to use the HOV lane, then click the '''{{Button|format=bold|bgcolor=#AAE2C0|style=border-radius:.95em;| +'''  }} while remaining on the same restriction line and select '''Vehicle type.'''# Default vehicle type '''Private''' is added to the restriction line[[File:Private HOV 3 EZPass.PNG|center|500px|border]]# If another type is required, then click '''{{Button|format=bold|bgcolor=#AAE2C0|style=border-radius:.95em;|Private''' }} and a drop down menu will appear with available vehicle types
# Select the applicable vehicle type
{{mbox|type=important|text= '''Note''' only private vehicle and taxi are currently available selections in the app{{as of|2017|11|lc=yes}}; therefore you can add other allowed vehicle types motorcycles, bus, public transportation, electric vehicle, etc for future compatibility. Waze Staff states that the other prohibited rules (eg for vehicle types do ) should not need to be added as a restriction/allowanceif they may conflict with an allowed rule until we are notified that the programming is changed to handle such conflicts.}}# Click '''the {{Button|format=bold|bgcolor=#78AFBE|{{color|Add''' |white}}}} button in bottom right corner
# Repeat for any additional HOV restrictions required for the segment(s) selected
# If the HOV lane is open to all traffic for the rest of day, then no other time restrictions are required (traffic travels in the same direction rest of the day)
#* Add the appropriate time restrictions for when the original direction is closed
#* Select '''"prohibited"''' in '''Driving is _____ for''', and leave '''"Any vehicle"''' selected: [[File:Driving_prohibited.PNG|center|500px|border]]
#* Add the appropriate HOV restrictions for the opposite directionas explained above at the end of the [[#Enter/exit anywhere HOV|Enter/exit anywhere HOV]] section.
#* Add the appropriate time restrictions for when the opposite direction is closed
#* While entering restrictions, remember there is often a transition time gap between traffic direction reversals to prevent collisions
# Click '''the {{Button|Save''' }} icon on the light blue waze Waze bar
{{mbox|type=important|text= '''Note''' be sure to add the '''Driving is Prohibited''' period(s) if a reversible lane does not allow traffic to prevent misrouting.}}
# Select the applicable road segment(s)
# Click the '''{{Button|format=bold|bgcolor=#FCE5A1|Add restrictions''' }}Add restrictions}} button# First restriction popup screen appears[[File:Restriction_first_popup.PNG‎|center|250px|border]]
# If no toll is required for HOV, then skip to step 6
# If a toll is required for HOV vehicles, then select the '''toll attribute''' in bottom left corner (ex. I-93 N's HOV / Express to Airport / S Station in Boston, MA)
# Select the appropriate direction ('''A>B''', '''B>A''', or '''TWO WAY''') on the popup screen
# Click the '''apply''' {{Button|format=bold|bgcolor=#78AFBE|{{color|Apply|white}}}} button in the bottom right corner
# Second restriction popup screen appears[[File:I-66E_AM_HOV.PNG‎|center|200px|border]]
# Select '''Entire segment''' in the '''Applies to''' section [[File:Applies_to_box.PNG|center|500px|border]]
# If '''toll attribute''' is already selected, then skip to step 16
# Remember toll attribute must not be selected to be able to properly save a toll free TBSR
# Select '''toll free''' if free for HOV vehicles, restriction's background color should change to blue [[File:Driving_is_allowed_forDriving_is_allowed_for_toll_free.PNG|center|500px|border]]#Select '''Minimum passengers''' by clicking the '''{{Button|format=bold|bgcolor=#A6E3F1|style=border-radius:.95em;| +'''  }} on the green blue add restriction banner and a drop down menu will appear[[File:Requires Pass Veh Type Min PassToll_Free_initial_drop_down.PNG|center|500px|border]]# '''At least 2 passengers''' is added[[File:Num_passengers_dropdownToll_Free_Min_Pass_initial.PNG|center|500px|border]]# Select number of passengers required by clicking the ''' {{Button|format=bold|bgcolor=#A6E3F1|style=border-radius:.95em;|At least 2 passengers''' }} and a drop down menu will appear with selections for '''At least 3 (/ 4) passengers'''[[File:HOV min passenger drop down.PNG|center|500px|border]]
# If toll free, then skip to step 24
# Click the '''{{Button|format=bold|bgcolor=#A6E3F1|style=border-radius:.95em;| +'''  }} again while remaining on the same restriction as the number of passengers to select '''Requires a pass'''# '''Sunpass''' is added to the restriction line[[File:Subscription_dropdownHOV Pass Sunpass.PNG|center|500px|border]]# Click the '''{{Button|format=bold|bgcolor=#A6E3F1|style=border-radius:.95em;|Sunpass''' }} area , and a drop down menu will appear with available companies, passes, and permits [[File:Toll free drop down pasess.PNG|center|200px|border]]# Select the applicable transponder company / pass # Click '''{{Button|format=bold|bgcolor=#78AFBE|{{color|Add''' |white}}}} button in bottom right corner# Click '''{{Button|format=bold|Save''' }} icon on the light blue waze Waze bar
# If HOV lane is only for part of the day, Open to all rest/part of day, or Reversible lane then set appropriate prohibited restriction(s)[[File:Driving_prohibited.PNG|center|500px|border]]
# Make sure one restriction period is added for the segment(s) then add additional restrictions till all appropriate times are added for one direction
Normally the HOV vehicle is allowed to use the lane for free while other vehicles have to pay a toll. The toll rate can be variable with surge pricing to control the number of vehicles that are not HOV on the road. Therefore this is setting up '''or''' statements. A vehicle can use the road for free if meeting the HOV requirements ''or'' the vehicle has to pay a toll.
=====Where to mark toll free / toll segments=====# Mark a road segment with a toll free restriction only if along the segment has a entire path of toll booth, transponder reader, or other tolling devicefree travel; this is required for it to work properly# Marking a segment as toll free makes the segment act as a toll for all other users (even though tollattribute is not checked)# Do not mark the toll attribute; which would prohibit adding a toll free restriction # Non-toll collecting segments should not have the If the HOV has to pay a toll free restriction# Normally one does not mark then only select the final toll booth, transponder reader, or other tolling device for toll free. Mark this final segment if it is the '''only segment''' marked toll free for at least one route attribute on the toll road. {{mbox|type=important|text= '''Note''' Waze assigns a large penalty for each road segment that is assumed to collect tolls if segments with a user has avoid toll roads selected. Marking each toll booth/or transponder for applicable ; other segments helps to route the user off at the nearest exit if the user selected avoid tolls but allows them to take a short toll road if it is the only reasonable routeare not marked.}}
=====Adding HOT/Express lane restrictions=====
'''Validate if all segments need to be marked or just the ones with toll booth or transponder'''
# Select a segment that has a toll booth, transponder reader, or other tolling device
# Do not select a segment with the final toll booth, transponder reader, or other tolling device, unless at least one route does not have one previously marked
# Do not check the toll road attribute in the bottom left corner of the popup box; this prevents having toll free restrictions [[File:Restriction_first_popup.PNG‎|center|250px|border]]
# Select the appropriate direction ('''A>B''', '''B>A''', or '''TWO WAY''') on the popup screen
# Click the '''applyadd new''' button in under the bottom right corner direction of the restriction
# Second restriction popup screen appears[[File:HOT Restriction.PNG|center|500px|border]]
# Select '''Entire segment''' and '''HOT''' in the '''Applies to''' section
# Select '''toll free''' on the '''Driving is ____ for''' section [[File:Toll_free.PNG ‎|center|500px|border]]
# Select '''Minimum passengers''' by clicking the '''+''' on the green blue add restriction banner and a drop down menu will appear [[File:Toll free min passengers.PNG|center|500px|border]]
# '''At least 2 passengers''' is added[[File:Toll_free_min_3_or_4.PNG|center|500px|border]]
# Select number of passengers required by clicking the '''At least 2 passengers''' and a drop down menu will appear with selections for '''At least 3 (4) passengers'''
# Select '''Requires a pass''' by clicking the '''+''' on the green blue add restriction banner and a drop down menu will appear[[File:Toll free requires pass.PNG|center|500px|border]]
# Select applicable transponder company by clicking the '''Sunpass''' and a drop down menu will appear with all available companies[[File:Toll_free_drop_down.PNG|center|500px|border]]
# Click '''Add''' button in bottom right corner
# Add the toll for other vehicles on this segment[[File:Add Transponder.PNG|center|500px|border]]
# Select the appropriate direction ('''A>B''', '''B>A''', or '''TWO WAY''') on the popup screen
# Click the '''applyadd new''' button in under the bottom right corner direction of the restriction# Second restriction popup screen appears[[File:Applies_to_box.PNG|center|500px|border]]
# Select '''Entire segment''' and '''HOT''' in the '''Applies to''' section [[File:Entire_Segment_HOV.PNG|center|500px|border]]
# Select '''Allowed''' on the '''Driving is ____ for''' section
# Note ALL vehicles that are '''Toll free''' MUST be listed in the '''Allowed''' section too. Vehicles that are not listed in the Allowed section will not be routed onto the segment.# Select '''Requires a pass''' by clicking the '''+''' on the green add restriction banner and a drop down menu will appear [[File:HOT requires passRequires Pass Veh Type Min Pass.PNG|center|500px|border]]# Select applicable transponder company by clicking the '''Sunpass''' and a drop down menu will appear with all available companies[[File:HOT_Req_Pass_DropdownSubscription_dropdown.PNG|center|500px|border]]
# Click '''Add''' button in bottom right corner
# Click '''Save''' icon on the light blue waze bar
# If HOT lane is only for part of the day, Open to all rest/part of day, or Reversible lane then set appropriate prohibited restriction(s)[[File:Driving_prohibited.PNG|center|500px|border]]
# Make sure one restriction period is added for the segment(s) then add additional restrictions till all appropriate times are added for one direction
# Make sure you restrict the applicable vehicle types that are not allowed; example trucks or vehicle pulling a trailer. If selection of a truck vehicle type is allowed as a future feature and there is an allowable restriction for any vehicle with a certain transponder then a truck with that transponder would be routed improperly.
# If a reversible segment, then add the appropriate time and restrictions for the opposite direction
{{mbox|type=important|text= '''Note''' be sure to add the '''Driving is Prohibited''' period(s) if a reversible lane does not allow traffic to prevent misrouting.}}