User:Codgerd/Road names/USA/Revision View history

No edit summary
m (Removed USA subpage links)
(9 intermediate revisions by 3 users not shown)
Line 1: Line 1:
For Road Types in the editor see [[Road types/USA]]
For Road Types in the editor see [[Road types]]


''This page covers road names for the country listed in the page title. For other countries see [[Road types and names|this page]].''
''This page covers road names for the country listed in the page title. For other countries see [[Road types and names|this page]].''
Line 5: Line 5:
==Road naming==
==Road naming==


'''NOTE''': we are in the process of revising the names as they appear in WME. In the near future we may be able to display alternate names for each segment / road, and choose which one of these is the 'common' name. This is also true for road shield generation which is partially broken so shields may or may not be displayed in your area.
'''NOTE''': we are in the process of revising the names as they appear in WME. In the future we may be able to display alternate names for each segment / road, and choose which one of these is the 'common' name. This is also true for road shield generation which is partially broken so shields may or may not be displayed in your area.


If you are not sure about changing the name of a road, it is best to ask in the forum or wait until the changes described above are implemented.
If you are not sure about changing the name of a road, it is best to ask in the forum or wait until the changes described above are implemented.
Line 14: Line 14:


However, you might notice a few problems with the original road names:
However, you might notice a few problems with the original road names:
Some of the names are not the 'common' names (often, waze will display the 'name' of a highway while most people know this highway by its number).
Some of the names are not the 'common' names (usually, waze will display the 'name' of the hwy while most people know this hwy by its number).


On other examples, the same highway will have a different name on each side (for example, US Hwy 101 going North, and Bayshore Fwy going South).
On other examples, the same highway will have a different name on each side (for example, US Hwy 101 going North, and Bayshore Fwy going South).
Line 23: Line 23:


===Concurrent names===
===Concurrent names===
When two or more numbered highways (including interstates) run concurrently (i.e., when one stretch of road has multiple route numbers), the segment should be named after the '''primary''' of the routes.  The primary route will usually have one or more of the following attributes:
'''Overlapping Highways -''' When two or more numbered highways (or interstates) run concurrently (one stretch of road has multiple route numbers), the segment should be named after the '''primary''' of the routes.  The primary route will usually have one or more of the following attributes:
* The route whose mile markers are used for the concurrent segment
* The route whose mile markers are used for the concurrent segment
* The route whose exit numbers are used for the concurrent segment
* The route whose exit numbers are used for the concurrent segment
* When the concurrency ends, the route whose path does '''not''' get signed as a numbered exit.
* When the concurrency ends, the route whose path does '''not''' get signed as a numbered exit.
The other route number(s) should be entered as alternate names.
The other route number(s) can be entered as alternate names.  If alternate names are entered, be sure not to introduce any alternate name discontinuities which may trigger the [[Detour Prevention Mechanisms|big detour prevention mechanism]].


In situations where a highway passes through a town, the road in those areas is typically named something other than the numbered route. In these situations the road should be named based on the following conditions:
'''Highways through cities/towns -''' In situations where a highway passes through a town, the road in those areas is typically named something other than the numbered route. In these situations the road should be named based on the following conditions:
* If the local street signs provide guidance with the local name, that should be used as the primary name in the Waze map. The numbered route designation should be added as an alternate name.  
* If the local street signs provide guidance with the local name, that should be used as the primary name in the Waze map. The numbered route should be added as an alternate name.  
* If the local signs only indicate the route number, then the numbered route designation should be the primary name. The local road name should be added as an alternate name.
* If the local signs only indicate the route number, then that should be the primary name and the local road name should be added as an alternate name.


===United States Interstate Highway System  [[Image:I-95.svg.png|28px]]  [[Image:I-695.svg.png|35px]]===
===United States Interstate Highway System  [[Image:I-95.svg.png|28px]]  [[Image:I-695.svg.png|35px]]===
: Roads in the Interstate Highway System should be denoted as follows: "I-[number] [direction]". For example,
: Components of the Interstate Highway System should be denoted as shown:
:: '''I-10 E''' for Interstate 10, eastbound
:: '''I-10 E''' for Interstate 10, Eastbound
:: '''I-310 S''' for Interstate 310, southbound
:: '''I-310 S''' for Interstate 310, Southbound
:: '''I-35E N''' for Interstate 35E, northbound (this format applies only to I-35E and I-35W, and I-69W, I-69C, and I-69 E).
:: '''I-35E N''' for Interstate 35E, Northbound (Letter suffixes are only in Minnesota and Texas)
: [http://en.wikipedia.org/wiki/List_of_business_routes_of_the_Interstate_Highway_System Interstate Business Routes] should be named as follows: "I-[number] BUS" if undivided; "I-[number] BUS [direction]" if divided. For example,
: Nearly all interstates are divided highways by necessity, and they should be drawn as such in the map for navigational accuracy.
:: '''I-94 BUS''' for Interstate 94 Business
:: '''I-40 BUS E''' for Interstate 40 Business, eastbound
: Nearly all interstates are divided highways by definition, and they should be drawn as such in the map for navigational accuracy.
: Always include the cardinal direction on Interstate highway segments.
: As with all other numbered highways, include the cardinal direction on Interstate business route segments if the road is split in Waze.


===United States Numbered Highways  [[Image:US 20.svg.png|30px]]===
===United States Numbered Highways  [[Image:US 20.svg.png|30px]]===


: US Highways
The naming of highways is, of course, somewhat more complex than that of normal roads. Therefore, conventions must be followed to assure consistency throughout the map.
: Federal highways should be denoted as follows:
 
:: Undivided US highways: '''US-[number]'''
Certain formatting guidelines must be followed to ensure that highway shields are shown in the Live Map and in the client. Note that currently shield generation is not currently operating at 100%, so some areas do not have the shields on all roads. Waze has said that there will eventually be a process allowing map editors to add shields to road segments in a way that is not connected to the name OF that segment.
:: Divided US highways: '''US-[number] [direction]'''
 
:: Undivided US highway bannered routes: '''US-[number] BUS'''
; US Highways
:: Divided US highway bannered routes: '''US-[number] BUS [direction]'''
: Federal highways should be denoted as follows. Note that the trailing N, S, E, W cardinal direction indicator is used for numbered highways and interstates which are split into two 1-way segments, [[Best_map_editing_practice#When_.28Not.29_to_Split_a_Two-Way_Road|per the guidelines]].
:: US highway bannered routes in states that use the ##A & ##B format: '''US-[number][A or B]'''
 
: Use the following abbreviations for bannered routes:
:: '''US-61 S''' for U.S. Highway 61, Southbound
:: '''BUS''' - Business
:: '''US-425 W''' for U.S. Highway 425, Westbound
:: '''ALT''' – Alternate
:: '''US-90 BUS S''' for U.S. Highway 90 Business, Southbound
:: '''BYP''' - Bypass
:::(note that BUS should be all uppercase for TTS to pronounce as "business".  "Bus", "bus", etc. will pronounce as "Bus".)
:: '''CONN''' - Connector
:: '''US-90 ALT E''' for U.S. Highway 90 Alternate, Eastbound
:: '''SPUR''' – Spur
:: '''US-199 SPUR''' for U.S. Highway 199 Spur
:: '''Scenic''' - Scenic
 
:: '''TEMP''' – Temporary
: For example,
:: '''US-61 S''' for US Highway 61, southbound
:: '''US-425 N''' for US Highway 425, northbound
:: '''US-90 BUS W''' for US Highway 90 Business, westbound
:: '''US-60 ALT E''' for US Highway 60 Alternate, eastbound
:: '''US-21 SPUR''' for US Highway 21 Spur
:: '''US-40 Scenic''' for US Highway 40 Scenic (the only one of its kind!)
:: '''US-71B''' for US Highway 71B (signed as such)
::: (note that BUS must be all uppercase for TTS to pronounce as "business".  "Bus", "bus", etc. will pronounce as "Bus".)
: Note that the trailing N, S, E, W cardinal direction indicator is used for numbered highways and interstates which are split into two 1-way segments, [[Best_map_editing_practice#When_.28Not.29_to_Split_a_Two-Way_Road|per the guidelines]]. On bannered routes, the cardinal direction is to be placed after the bannered route.
: Also refer to the [[#Concurrent_names|concurrent names]] section when the highway passes through a city or town that also has a local name for the road.
: Also refer to the [[#Concurrent_names|concurrent names]] section when the highway passes through a city or town that also has a local name for the road.


===State highways  [[Image:State Hwy Sign 35.svg.png|30px]] [[Image:South_Carolina_170.svg.png|38px]] [[Image:Florida_60.svg.png|30px]] [[Image:Louisiana 3234.svg.png|30px]] [[Image:Alabama_5.svg.png|30px]] [[Image:MT-sec-326.svg.png|30px]] [[Image:North_Dakota_23.svg.png|30px]]===
===State highways  [[Image:State Hwy Sign 35.svg.png|30px]] [[Image:South_Carolina_170.svg.png|38px]] [[Image:Florida_60.svg.png|30px]] [[Image:Louisiana 3234.svg.png|30px]] [[Image:Alabama_5.svg.png|30px]] [[Image:MT-sec-326.svg.png|30px]] [[Image:North_Dakota_23.svg.png|30px]] [[Image:Hawaii_marker.png|30px]]===
; State Highways
; State Highways
: The Live Map will parse "State Rte xx" and "State Hwy yyy" and show a sign badge. However, as different states have different naming conventions (and different shields), this is not optimal for ramps. Local naming conventions are preferred for ramps and exits; this will be discussed below. Consistency within each state is key. '''*NEW*'''
: The Live Map will parse "State Rte xx" and "State Hwy yyy" and show a sign badge. However, as different states have different naming conventions (and different shields), this is not optimal for ramps. Local naming conventions are preferred for ramps and exits; this will be discussed below. Consistency within each state is key. '''*NEW*'''
Line 80: Line 64:
: State routes may also be split if it [[Best_map_editing_practice#When_.28Not.29_to_Split_a_Two-Way_Road|meets the guidelines]].
: State routes may also be split if it [[Best_map_editing_practice#When_.28Not.29_to_Split_a_Two-Way_Road|meets the guidelines]].


: Each state may use a longer or shorter naming format. See the [[Highway naming/USA|highway naming by state]] table for specific formatting of each state.
: Each state may use a longer or shorter naming format. See the [[Highway naming|highway naming by state]] table for specific formatting of each state.


: Long Names
: Long Names
:: '''State Hwy 6''' for state route/highway 6
:: '''State Hwy 6''' for state highway 6
:: '''State Hwy 99W S''' for state route 99W, southbound
:: '''State Hwy 99W S''' for state highway 99W, southbound
:: '''State Rte 96''' for state route 96
:: '''State Rte 96''' for state route 96


: Short Names
: Short Names
:: Use the '''SR-xxx''' (meaning State Route, but used for both routes and highways) format instead of '''State Rte xxx''' and '''State Hwy xxx''' format, but keep the same cardinal, business, etc. extensions as described above.
:: Use the '''SR-xxx''' or '''SH-xxx''' formats instead of '''State Rte xxx''' and '''State Hwy xxx''' format as appropriate for the state, while keeping the same cardinal, business, etc. extensions as described above. These shortened formats are now preferred over the Long Names for all applications.


::{{Red|'''NOTE:''' In some states there are other formats used, e.g., in Louisiana, use the LA-xxx format. Refer to the [[Highway naming/USA|highway naming by state]] table for specific formatting of each state.}}
::{{Red|'''NOTE:''' In some states there are other formats used, e.g., in Louisiana, use the LA-xxx format. Refer to the [[Highway naming|highway naming by state]] table for specific formatting of each state.}}


: Also refer to the [[#Concurrent_names|concurrent names]] section when the highway passes through a city or town that also has a local name for the road.
: Also refer to the [[#Concurrent_names|concurrent names]] section when the highway passes through a city or town that also has a local name for the road.


===County highways and county roads  [[Image:Baldwin County Route 64 AL.svg.png|35px]] [[Image:St Louis County Route 7 MN.svg.png|35px]]===
===County and township highways and roads  [[Image:Baldwin County Route 64 AL.svg.png|35px]] [[Image:St Louis County Route 7 MN.svg.png|35px]]===


Text to speech on the client reads CR as "County Road." So "CR-10" is read as "County Road Ten"
Text to speech on the client reads CR as "County Road." So "CR-10" is read as "County Road Ten"
Line 102: Line 86:
There is no other TTS abbreviation for county owned roads in any capacity. For these reasons: that county shields may someday be supported (and a named standard makes this easier to implement), and for brevity's sake in turn instructions and map displays, it is suggested (but by no means required) that individual states adopt the CR- standard.
There is no other TTS abbreviation for county owned roads in any capacity. For these reasons: that county shields may someday be supported (and a named standard makes this easier to implement), and for brevity's sake in turn instructions and map displays, it is suggested (but by no means required) that individual states adopt the CR- standard.


Another standard in use (which is longer, but you may see) is 'County Hwy XX'.
Another standard in use (which is longer, but you may see) is 'County Hwy XX'. The shortened format of CH- is available and is encouraged to be adopted when CR- is not appropriate.


Many states have adopted the short format '''CR-xxx''' instead of the longer format. See the [[Highway naming/USA|highway naming by state]] table for specific formatting of each state.
Many states have adopted the short format '''CR-xxx''' instead of the longer format. See the [[Highway naming|highway naming by state]] table for specific formatting of each state.


: Also refer to the [[#Concurrent_names|concurrent names]] section when the highway passes through a city or town that also has a local name for the road.
: Also refer to the [[#Concurrent_names|concurrent names]] section when the highway passes through a city or town that also has a local name for the road.


===Exit ramps and entrance ramps (on-ramps)===
For regions that have township highways, the shortened formats of TH- and TR- are also available.
 
===Exit ramps and entrance ramps (on-ramps){{Anchor|Exit|Entrance|Ramp}}===
{{construction
{{construction
| contact    = https://www.waze.com/forum/viewtopic.php?f=276&t=101346&start=30
| contact    = http://www.waze.com/forum/viewtopic.php?f=276&t=101346&start=30
| contacttype = forum
| contacttype = forum
| draft      = no
| draft      = no
Line 122: Line 108:
Exit ramps and Entrance ramps are to be set as {{Ramp}} road type. The name of the ramp should match the exit or entrance signage as closely as possible. Minimal disparity between sign and instruction is our goal. If done properly, the driver will not have to struggle to compare Waze's on-screen or verbal instructions with what he or she sees in real life on the road.
Exit ramps and Entrance ramps are to be set as {{Ramp}} road type. The name of the ramp should match the exit or entrance signage as closely as possible. Minimal disparity between sign and instruction is our goal. If done properly, the driver will not have to struggle to compare Waze's on-screen or verbal instructions with what he or she sees in real life on the road.
* If an exit is signed and numbered, name the exit ramp as such: "Exit 24: US-103 / Schwarzenegger Rd". In other words, start with the word "Exit" followed by the exit number, follow the exit number with a colon (": "), and separate all elements (shields and names) after the colon with slashes (" / ").
* If an exit is signed and numbered, name the exit ramp as such: "Exit 24: US-103 / Schwarzenegger Rd". In other words, start with the word "Exit" followed by the exit number, follow the exit number with a colon (": "), and separate all elements (shields and names) after the colon with slashes (" / ").
* If an exit is signed and unnumbered, name the exit ramp as such: "to SR-33 / Kindergarten Ct". In other words, start with the word "to" (lowercase) followed by all elements on the sign (shields and names), separated with slashes (" / "). {{Red|'''(This rule has changed recently.)'''}}
* If an exit is signed and unnumbered, name the exit ramp as such: "to SR-33 / Kindergarten Ct". In other words, start with the word "to" (lowercase) followed by all elements on the sign (shields and names), separated with slashes (" / "). {{Red|'''(Rule change: August 2014.)'''}}
** If the exit number is assigned and designated by the local roadway agency, but does not yet appear on the sign, it is OK to include the exit number in advance of it appearing on the road sign. This prevents additional updates later when the numbered sign is added to the roadway and it helps visual guidance when other exits before that one are numbered. Drivers can better anticipate their approaching exit.
** If the exit number is assigned and designated by the local roadway agency, but does not yet appear on the sign, it is OK to include the exit number in advance of it appearing on the road sign. This prevents additional updates later when the numbered sign is added to the roadway and it helps visual guidance when other exits before that one are numbered. Drivers can better anticipate their approaching exit.
* If an exit is unsigned, include the designation and/or name of the road as if it is signed (i.e., starting with "to"). For example, if an unsigned exit serves "US-12", a signed highway which is locally known as "Michigan Ave", name the ramp segment "to US-12 / Michigan Ave". If only a local name or only a highway designation are present, use only that.
* If an exit is unsigned, include the designation and/or name of the road as if it is signed (i.e., starting with "to"). For example, if an unsigned exit serves "US-12", a signed highway which is locally known as "Michigan Ave", name the ramp segment "to US-12 / Michigan Ave". If only a local name or only a highway designation are present, use only that.
Line 130: Line 116:
* Include everything that is present on the last sign prior to the exit. Do not combine all possible pre-ramp signage into the single ramp segment name.
* Include everything that is present on the last sign prior to the exit. Do not combine all possible pre-ramp signage into the single ramp segment name.
* Remember to abbreviate common words following the [[abbreviations and acronyms]] page.
* Remember to abbreviate common words following the [[abbreviations and acronyms]] page.
 
* In general, the exit ramp name should match the contents of the exit signage as closely as possible, subject to the formatting considerations described above. If an exit ramp forks into further ramps to separate destinations, and if the signage on the latter ramps is identical to the relevant portion of the initial ramps' sign(s), it ''may'' be advisable not to name the first exit ramp at all. Rather name only the ramps which are the first ones to distinct destinations. The Waze client will give all the proper exit and keep left or right instructions to guide the driver to the correct exit, even if the first one is not named. ''See the [[#Navigation instructions for unnamed segments|Navigation instructions for unnamed segments]] section for more details.'' <Br>Circumstances in which it ''may'' be advisable to leave the exit ramp unnamed include:
In the general case, the exit ramp name should match the text on the exit signage as closely as possible. If the exit off the main interstate or highway divides into exits to separate destinations further down the road, it may be advisable not to name the first exit ramp, but rather name only the ramps which are the first one to a distinct destination. The Waze client will give all the proper exit and keep left or right instructions to guide the driver to the correct exit, even if the first one is not named. This should only be done if the signage for the first ramp is the same as that on the subsequent, named ramp.
** The length of text on the first ramp signage is too long for the client device to display
 
** The TTS (Text-to-Speech) instruction is too long to provide the next instruction in time
Circumstances in which it may be appropriate to leave the exit ramp unnamed include:
** The length of TTS has the potential to be too distracting to the driver
* when the length of text on the first ramp signage is too long for the client device to display
** The length of instruction might cause confusion to the driver in finding a match when multiple signs are present
* when TTS is too long to provide the next instruction in time
** The initial signage is unclear, or poorly visible from a distance
* when the length of TTS has the potential to be too distracting to the driver
** Complex multi-lane exits with multiple overhead signs clearly matching exits to lanes
* when the length of instruction might cause confusion to the driver in finding a match when multiple signs are present
:Despite all the foregoing, analysis, context sensitivity, and the good judgement of editors should take precedence: the goal is to help drivers navigate their immediate situation. This means providing simple, practical guidance on the approach and transit of an intersection or interchange.
* in complex multi-lane exits where a measure of lane guidance may be provided
 
Despite all the foregoing, analysis, context sensitivity, and the good judgement of editors should take precedence: the goal is to provide the clearest navigation instruction to the driver.


For entrance ramps, use this format: "to [street name] [direction] / [control city]", where applicable.  For example,
For entrance ramps, use this format: "to [street name] [direction] / [control city]", where applicable.  For example,
Line 158: Line 141:
===New streets===
===New streets===


Sometimes, there is a brand new road that does not yet have a name visible to drivers. Or the person who used the pave option did not leave a note giving the name of the new road. In these cases, it is okay to leave the name of the road blank by marking the "None" checkbox next to the '''Name''' field in the [[Creating and editing road segments#Address Properties|Address Properties]] in the editor. Always make sure to choose the proper [[Road types/USA|road type]] and [[Creating and editing road segments#Confirm the road by updating details|confirm the other road details]] to ensure that the road appears on the client app.
Sometimes, there is a brand new road that does not yet have a name visible to drivers. Or the person who used the pave option did not leave a note giving the name of the new road. In these cases, it is okay to leave the name of the road blank by marking the "None" checkbox next to the '''Name''' field in the [[Creating and editing road segments#Address Properties|Address Properties]] in the editor. Always make sure to choose the proper [[Road types|road type]] and [[Creating and editing road segments#Confirm the road by updating details|confirm the other road details]] to ensure that the road appears on the client app.


=== Incomplete segments or red roads ===
=== Incomplete segments or red roads ===


[[File:Incomplete.jpg|right|120px|Incomplete.jpg]] Be sure to select country, state, enter the city name or check No City, and enter a street name, or check No Street. Until you do this, your road will not be routable and will not show on the client map. These incomplete segments are colored bright red in WME.
[[File:Incomplete.jpg|right|120px|Incomplete.jpg]] Be sure to select country, state, enter the city name or check "None", and enter a street name, or check "None". Until you do this, your road will not be routable and will not show on the client map. These incomplete segments are colored bright red in WME.


This must be done on all streets created in WME, and on all streets created with the client "Pave" function.
This must be done on all streets created in WME, and on all streets created with the client "Pave" function.
Line 169: Line 152:


For more detailed instructions on how to address red roads see: [[Creating and editing road segments#Confirm the road by updating details|Confirming the road by updating details]]
For more detailed instructions on how to address red roads see: [[Creating and editing road segments#Confirm the road by updating details|Confirming the road by updating details]]
=== Navigation instructions for unnamed segments  ===
{{User:PesachZ/Navigation instructions for unnamed segments/Conditions|transclude=yes}}


== Abbreviations and acronyms ==
== Abbreviations and acronyms ==
Line 176: Line 162:
A basic rule of thumb is, "when in doubt, spell it out".
A basic rule of thumb is, "when in doubt, spell it out".


Refer to the [[Abbreviations and acronyms]] page for a list of suffix abbreviations.
Refer to the [[Abbreviations and acronyms]] page for a list of suffix and recommended abbreviations.


== {{Anchor|Construction zone}}Construction zones and closed roads ==
== {{Anchor|Construction zone}}Construction zones and closed roads ==
''{{Red|This standard has recently changed (Feb 2014). Please pay close attention to the changes.}}''
''{{Red|This standard has recently changed {{As of|2014|12|df=us|lc=y}}. Please pay close attention to the changes.}}''


This section describes the naming of roads that are closed. See the article [[Real time closures]] for instructions on how to enact a closure on a road segment. The closure should be enacted before renaming the road segments.
This section describes the naming of roads that are closed. See the article [[Real time closures]] for instructions on how to enact a closure on a road segment. The closure should be enacted before renaming the road segments.
Line 189: Line 175:


===Long term closures===
===Long term closures===
When a road is '''closed to traffic for long-term construction''', after you [[Real time closures|close the road]], add '''"(Closed)"''' to the end of the road name. ''Example, "Ramble Dr" would become "Ramble Dr (Closed)".''


===Major construction without closure===
'''Updated {{As of | 2014 | 12 | df=us | lc=y}}'''<br />
When a road is '''under long-term construction, but is not closed''', add '''"(Construction Zone)"''' to the end of the name unless it involves a shielded, limited access road. ''For example, "Tamble St" would become "Tamble St (Construction Zone)".''


When construction is complete, remove "(Construction Zone)" from the name, and be sure to reattach any roads which may have been disconnected.
The requirement to add '(Closed)' to a road segment has been deprecated. Adding this phrase to a road segment can cause routing/navigation issues for Wazers.


If there is a significant change to traffic patterns or geometry (lane shifts), adjust the geometry, connections, and restrictions of the segments to match the current traffic pattern. You must be able to monitor the area, and readjust once the construction is complete, or when additional changes are made during construction.
===Major construction without closure===


'''The following is a list of situations that warrant use of the "(Construction Zone)" suffix:'''
'''Updated {{As of | 2014 | 12 | df=us | lc=y}}<br />


* Major, long-term construction (usually lasting at least one month)
{{Red|''It is no longer necessary to add '(Construction Zone)' to any road under construction.  Adding this phrase can cause routing/navigation issues and serves no purpose in the app or for the Wazer.''}}
* Long term lane closures or lane shifts (typically lasting for the duration of the construction, or for a month or more at a time)
* Temporary recurring lane closures or lane shifts, if 1) the recurrence is regularly occurring over a long period and 2) they often occur during heavy travel hours (roughly from 6 am to 8 pm)
* Construction with no semi-permanent recurring or lane closures or lane shifts, but where small lane closures and slow-moving construction traffic are common during heavy travel hours


'''"(Construction Zone)" should ''not'' be used for the following (unless one of the other conditions above is met):'''
If there is a significant change to traffic patterns or geometry (lane shifts), adjust the geometry, connections, and restrictions of the segments to match the current traffic pattern. You must be able to monitor the area, and readjust once the construction is complete, or when additional changes are made during construction.
* Short-term construction (usually lasting under one month)
* Temporary lane closures or lane shifts, if the closures or shifts occur through the night (for example, between 10 pm and 5 am)
* Construction with no lane closures or lane shifts, even with possible occasional construction traffic


== Official sources of mapping information ==
== Official sources of mapping information ==


Being in the Waze community of editors means sharing information you discover and learning from the discoveries of others! You can see some of the (old) [http://www.waze.com/forum/viewtopic.php?f=129&t=13695 official sources of mapping information (US only) provided in the forum] or check out the (new) [[Mapping resources/USA|mapping resources]] wiki page (preferred).
Being in the Waze community of editors means sharing information you discover and learning from the discoveries of others! You can see some of the (old) [http://www.waze.com/forum/viewtopic.php?f=129&t=13695 official sources of mapping information (US only) provided in the forum] or check out the (new) [[Mapping resources|mapping resources]] wiki page (preferred).


Feel free to add new resources as you find them.
Feel free to add new resources as you find them.

Revision as of 00:22, 11 May 2017

For Road Types in the editor see Road types

This page covers road names for the country listed in the page title. For other countries see this page.

Road naming

NOTE: we are in the process of revising the names as they appear in WME. In the future we may be able to display alternate names for each segment / road, and choose which one of these is the 'common' name. This is also true for road shield generation which is partially broken so shields may or may not be displayed in your area.

If you are not sure about changing the name of a road, it is best to ask in the forum or wait until the changes described above are implemented.

IMPORTANT! Due to upgrades in the client, some naming conventions have changed. The altered conventions will be marked with a bolded *NEW*. These changes have now been finalized. Thank you for your cooperation.

All roads in our base maps came with the names as defined in the US TIGER dataset.

However, you might notice a few problems with the original road names: Some of the names are not the 'common' names (usually, waze will display the 'name' of the hwy while most people know this hwy by its number).

On other examples, the same highway will have a different name on each side (for example, US Hwy 101 going North, and Bayshore Fwy going South).

Some roads actually have two 'common' names (for example, the NJ Turnpike is also I-95 and both are relevant names), but currently we can only display one name per road.

For all these issues, we ask that you currently leave the situation as is. We are working on a few fixes, that will automate the proper naming and also allow multiple names for each segments (with a 'Primary' name as the one being displayed, but other names that bring up the same search results).

Concurrent names

Overlapping Highways - When two or more numbered highways (or interstates) run concurrently (one stretch of road has multiple route numbers), the segment should be named after the primary of the routes. The primary route will usually have one or more of the following attributes:

  • The route whose mile markers are used for the concurrent segment
  • The route whose exit numbers are used for the concurrent segment
  • When the concurrency ends, the route whose path does not get signed as a numbered exit.

The other route number(s) can be entered as alternate names. If alternate names are entered, be sure not to introduce any alternate name discontinuities which may trigger the big detour prevention mechanism.

Highways through cities/towns - In situations where a highway passes through a town, the road in those areas is typically named something other than the numbered route. In these situations the road should be named based on the following conditions:

  • If the local street signs provide guidance with the local name, that should be used as the primary name in the Waze map. The numbered route should be added as an alternate name.
  • If the local signs only indicate the route number, then that should be the primary name and the local road name should be added as an alternate name.

United States Interstate Highway System

Components of the Interstate Highway System should be denoted as shown:
I-10 E for Interstate 10, Eastbound
I-310 S for Interstate 310, Southbound
I-35E N for Interstate 35E, Northbound (Letter suffixes are only in Minnesota and Texas)
Nearly all interstates are divided highways by necessity, and they should be drawn as such in the map for navigational accuracy.

United States Numbered Highways

The naming of highways is, of course, somewhat more complex than that of normal roads. Therefore, conventions must be followed to assure consistency throughout the map.

Certain formatting guidelines must be followed to ensure that highway shields are shown in the Live Map and in the client. Note that currently shield generation is not currently operating at 100%, so some areas do not have the shields on all roads. Waze has said that there will eventually be a process allowing map editors to add shields to road segments in a way that is not connected to the name OF that segment.

US Highways
Federal highways should be denoted as follows. Note that the trailing N, S, E, W cardinal direction indicator is used for numbered highways and interstates which are split into two 1-way segments, per the guidelines.
US-61 S for U.S. Highway 61, Southbound
US-425 W for U.S. Highway 425, Westbound
US-90 BUS S for U.S. Highway 90 Business, Southbound
(note that BUS should be all uppercase for TTS to pronounce as "business". "Bus", "bus", etc. will pronounce as "Bus".)
US-90 ALT E for U.S. Highway 90 Alternate, Eastbound
US-199 SPUR for U.S. Highway 199 Spur
Also refer to the concurrent names section when the highway passes through a city or town that also has a local name for the road.

State highways

State Highways
The Live Map will parse "State Rte xx" and "State Hwy yyy" and show a sign badge. However, as different states have different naming conventions (and different shields), this is not optimal for ramps. Local naming conventions are preferred for ramps and exits; this will be discussed below. Consistency within each state is key. *NEW*
The same note for U.S. Highways above applies for state highways. LA-308 in Golden Meadow should have "E Main St" as its primary name since that is the name used in addresses of houses and businesses along the highway.
State routes may also be split if it meets the guidelines.
Each state may use a longer or shorter naming format. See the highway naming by state table for specific formatting of each state.
Long Names
State Hwy 6 for state highway 6
State Hwy 99W S for state highway 99W, southbound
State Rte 96 for state route 96
Short Names
Use the SR-xxx or SH-xxx formats instead of State Rte xxx and State Hwy xxx format as appropriate for the state, while keeping the same cardinal, business, etc. extensions as described above. These shortened formats are now preferred over the Long Names for all applications.
NOTE: In some states there are other formats used, e.g., in Louisiana, use the LA-xxx format. Refer to the highway naming by state table for specific formatting of each state.
Also refer to the concurrent names section when the highway passes through a city or town that also has a local name for the road.

County and township highways and roads

Text to speech on the client reads CR as "County Road." So "CR-10" is read as "County Road Ten"

Where road names are the same as cardinal directions (N, S, E, W), place the letter designator in single quotes with a lowercase letter (CR-'n' CR-'s' CR-'e' CR-'w') so that the voice prompt will read the letter and not say it as a direction. Double or triple-letter roads with directional letters (e.g. CR-EN, CR-SAL) have not been tested but might be pronounced as if a word.

There is no other TTS abbreviation for county owned roads in any capacity. For these reasons: that county shields may someday be supported (and a named standard makes this easier to implement), and for brevity's sake in turn instructions and map displays, it is suggested (but by no means required) that individual states adopt the CR- standard.

Another standard in use (which is longer, but you may see) is 'County Hwy XX'. The shortened format of CH- is available and is encouraged to be adopted when CR- is not appropriate.

Many states have adopted the short format CR-xxx instead of the longer format. See the highway naming by state table for specific formatting of each state.

Also refer to the concurrent names section when the highway passes through a city or town that also has a local name for the road.

For regions that have township highways, the shortened formats of TH- and TR- are also available.

Exit ramps and entrance ramps (on-ramps)

This revision of a section is currently undergoing modifications. The information and guidance is currently considered accurate enough to be followed now. Content is being prepared by one or more users. Do not make any changes before you post a message in this forum.

Exit ramps and Entrance ramps are to be set as  Ramp  road type. The name of the ramp should match the exit or entrance signage as closely as possible. Minimal disparity between sign and instruction is our goal. If done properly, the driver will not have to struggle to compare Waze's on-screen or verbal instructions with what he or she sees in real life on the road.

  • If an exit is signed and numbered, name the exit ramp as such: "Exit 24: US-103 / Schwarzenegger Rd". In other words, start with the word "Exit" followed by the exit number, follow the exit number with a colon (": "), and separate all elements (shields and names) after the colon with slashes (" / ").
  • If an exit is signed and unnumbered, name the exit ramp as such: "to SR-33 / Kindergarten Ct". In other words, start with the word "to" (lowercase) followed by all elements on the sign (shields and names), separated with slashes (" / "). (Rule change: August 2014.)
    • If the exit number is assigned and designated by the local roadway agency, but does not yet appear on the sign, it is OK to include the exit number in advance of it appearing on the road sign. This prevents additional updates later when the numbered sign is added to the roadway and it helps visual guidance when other exits before that one are numbered. Drivers can better anticipate their approaching exit.
  • If an exit is unsigned, include the designation and/or name of the road as if it is signed (i.e., starting with "to"). For example, if an unsigned exit serves "US-12", a signed highway which is locally known as "Michigan Ave", name the ramp segment "to US-12 / Michigan Ave". If only a local name or only a highway designation are present, use only that.
  • If a single exit serves multiple roads or cities, use a slash with leading and trailing spaces: "Exit 32: Terminator Blvd / Total Recall Rd".
  • If an exit number contains one or more letters, include it exactly as displayed on the sign: "Exit 33B: Running Man St", or "Exits 35C-B-A: Junior Dr / Twins Ave / Jingle Allthe Way".
    • Separate sub-exit letters with a hyphen. Do not leave spaces between the hyphen and the adjacent characters.
  • Include everything that is present on the last sign prior to the exit. Do not combine all possible pre-ramp signage into the single ramp segment name.
  • Remember to abbreviate common words following the abbreviations and acronyms page.
  • In general, the exit ramp name should match the contents of the exit signage as closely as possible, subject to the formatting considerations described above. If an exit ramp forks into further ramps to separate destinations, and if the signage on the latter ramps is identical to the relevant portion of the initial ramps' sign(s), it may be advisable not to name the first exit ramp at all. Rather name only the ramps which are the first ones to distinct destinations. The Waze client will give all the proper exit and keep left or right instructions to guide the driver to the correct exit, even if the first one is not named. See the Navigation instructions for unnamed segments section for more details.
    Circumstances in which it may be advisable to leave the exit ramp unnamed include:
    • The length of text on the first ramp signage is too long for the client device to display
    • The TTS (Text-to-Speech) instruction is too long to provide the next instruction in time
    • The length of TTS has the potential to be too distracting to the driver
    • The length of instruction might cause confusion to the driver in finding a match when multiple signs are present
    • The initial signage is unclear, or poorly visible from a distance
    • Complex multi-lane exits with multiple overhead signs clearly matching exits to lanes
Despite all the foregoing, analysis, context sensitivity, and the good judgement of editors should take precedence: the goal is to help drivers navigate their immediate situation. This means providing simple, practical guidance on the approach and transit of an intersection or interchange.

For entrance ramps, use this format: "to [street name] [direction] / [control city]", where applicable. For example,

  • "to I-10 W / Baton Rouge"
  • "to Clearview Pkwy N / Mandeville"
  • "to US-90 BUS W"
  • "to LA-1 / Thibodaux / Lockport"
  • Similar to combined exit ramps, when multiple on-ramps combine before merging into the main interstate or highway, it is advised to name the last common ramp with the conventions listed above. This will usually be the last ramp which is the one which actually joins the main interstate or highway.
  • Using "Ramp to", "West", "WB", and "Westbound" should be avoided as "WB" is pronounced "double-you bee" and not 'westbound.' Further, the "to" will be automatically omitted from Text-to-Speech instructions. Do not omit the word "to", because this could cause confusion with, say, the "Select entire street" function.
  • State highways: When naming ramps and exits that lead to state highways, local naming should be used. This will maximize the clarity of navigation prompts for the majority of users in a given area. For example,
    • In New Jersey, highways are generally colloquially referred to as "routes". To distinguish from other (federal) highways, a sign for State Route 45 in New Jersey should say "to State Rte 45". In this case, the abbreviation "to SR-45" may also be used.
    • In Louisiana, state highways are generally colloquially referred to as "LA" (ell-ay) followed by the highway number. A ramp to Louisiana Highway 308 should be say "to LA-308".
    • In North Carolina (NC), state routes are generally colloquially referred to as "NC" followed by the route number. A ramp to NC Highway 55 should be say "to NC-55".
    • In general, follow the chart in the road naming by state article.
  • Similar to exit ramps, put multiple destination information, even from multiple signage, onto the single on-ramp name. Major destinations or highways/interstates can be included, but don't go crazy and add every possible town and city in that direction. "to US-90 BUS W / to I-10 W / Miss River Brg / Baton Rouge" is fine.

New streets

Sometimes, there is a brand new road that does not yet have a name visible to drivers. Or the person who used the pave option did not leave a note giving the name of the new road. In these cases, it is okay to leave the name of the road blank by marking the "None" checkbox next to the Name field in the Address Properties in the editor. Always make sure to choose the proper road type and confirm the other road details to ensure that the road appears on the client app.

Incomplete segments or red roads

Incomplete.jpg
Incomplete.jpg

Be sure to select country, state, enter the city name or check "None", and enter a street name, or check "None". Until you do this, your road will not be routable and will not show on the client map. These incomplete segments are colored bright red in WME.

This must be done on all streets created in WME, and on all streets created with the client "Pave" function.

"Paved" streets must also be connected to their adjacent roads, and turn restrictions must be set in order to be routable.

For more detailed instructions on how to address red roads see: Confirming the road by updating details

Navigation instructions for unnamed segments

When Waze gives navigation instructions to "turn", "exit", or "keep" onto an unnamed segment, it will look ahead on the recommended route for a road name that it can use. If there is a named segment further along the recommended route, it will use (inherit) that name in the instruction.

The inherited name is only used in the displayed and spoken instruction prompts, it does not affect the actual name of the segment. Unnamed segments are often used to control instructions on feeder ramps and at grade connectors (AGCs). Please be sure to understand all the ways in which unnamed segments can affect navigation instructions before adding names to unnamed segments or removing them from named segments.

This always works for  Freeways  and  Ramps .

This never works for  Parking Lot Roads  or  Private Roads , As of October 2018

On all other road types (any road type which is not a Freeway, Ramp, Parking Lot Road, or Private Road), this feature only works if:

  1. The combined length of the consecutive unnamed segments is shorter than 400 meters (1,312 feet),
    AND
  2. There are 3 or fewer unnamed segments in a row.


To explain the above conditions from other perspectives:

  1. If the consecutive unnamed  Local Street ,  Primary Street ,  Minor Highway , or  Major Highway  segments measured together are longer than 400 m (1,312 ft), or if there are 4 or more unnamed segments in a row, Waze will not show or speak a name in the instructions.
  2. Names are never inherited through unnamed  Parking Lot Road  or  Private Road  segments.

Abbreviations and acronyms

Only abbreviations that Waze recognizes should be used within the editor. Since Waze uses TTS (Text-to-Speech) prompting, it is important that the correct abbreviations are used to produce the correct speech output.

A basic rule of thumb is, "when in doubt, spell it out".

Refer to the Abbreviations and acronyms page for a list of suffix and recommended abbreviations.

Construction zones and closed roads

This standard has recently changed as of December 2014. Please pay close attention to the changes.

This section describes the naming of roads that are closed. See the article Real time closures for instructions on how to enact a closure on a road segment. The closure should be enacted before renaming the road segments.

This section also describes what actions to take when a road remains open, but there are significant changes to it while construction completes.

Brief closures

Roads can be closed using the Waze application for brief closures. Don't change the map for closures that will last less than about a month. Instead, use the Waze app Road Closed reporting function.

Long term closures

Updated as of December 2014

The requirement to add '(Closed)' to a road segment has been deprecated. Adding this phrase to a road segment can cause routing/navigation issues for Wazers.

Major construction without closure

Updated as of December 2014

It is no longer necessary to add '(Construction Zone)' to any road under construction. Adding this phrase can cause routing/navigation issues and serves no purpose in the app or for the Wazer.

If there is a significant change to traffic patterns or geometry (lane shifts), adjust the geometry, connections, and restrictions of the segments to match the current traffic pattern. You must be able to monitor the area, and readjust once the construction is complete, or when additional changes are made during construction.

Official sources of mapping information

Being in the Waze community of editors means sharing information you discover and learning from the discoveries of others! You can see some of the (old) official sources of mapping information (US only) provided in the forum or check out the (new) mapping resources wiki page (preferred).

Feel free to add new resources as you find them.