When Waze gives navigation instructions to "turn", "exit", or "keep" onto an unnamed segment, it will look for a name it can use. If there is a named segment {{u|further along your route}}, it will use (inherit) that name in the instruction.
The inherited name is only used in the displayed and spoken instruction prompts, it does not affect the actual name of the segment.
'''This always works for {{Freeway|Freeways}} and {{Ramp|Ramps}}.'''<br />
{{As of|January 2015}}, '''on all other road types''', this feature only works if:
# The combined length of the consecutive unnamed segments is shorter than 400 meters (1,312 feet), <br />AND
# There are 3 or less unnamed segments in a row.
To explain the above conditions from another perspective:
If the consecutive unnamed segments measured together are longer than 400 m (1,312 ft), or if there are 4 or more unnamed segments in a row, Waze will '''NOT''' show or speak a name in the instructions.
{{#ifeq:{{FULLPAGENAME}}|User:PesachZ/Navigation instructions for unnamed segments/Expanded||:''For a more detailed explanation, including side effects and usage examples, please see the [[User:PesachZ/Navigation_instructions_for_unnamed_segments/Expanded|Expanded Navigation instructions for unnamed segments]] page.''}}
---
<!-- Hi Wong Siew Meng, I read this as the core message, but I'm not sure. Please feel free to change, also for better wording or structure-->
<!-- Hi Wong Siew Meng, I read this as the core message, but I'm not sure. Please feel free to change, also for better wording or structure-->
When routing over an unnamed segment, Waze will use the name of the next named segment on the route. For example, if the unnamed segment is at a turn in your route, Waze will use the name of the next named segment in the turn instruction.
Note: Technical source is [[User:PesachZ/Road name inheritance]], which would probably be a good "for more detailed info" or a "see also" link... eventually updated to watever page s actually created for it. Also, that page will be transcludable with a short summary version, which may make sense to transclude here.
=Version 1=
When a user is routed through an unnamed segment, Waze will automatically use the name of the next named segment on the route. This is useful for getting turn instructions on ramps and turn lanes. This, however, can be confusing in large parking lots.
==When Waze uses a name for an unnamed segment==
Waze sometimes uses a name for an unnamed segment in a driving instruction. When Waze gives driving directions to turn, exit, or "keep" onto an unnamed segment, it will look for a name it can use. If there is a named segment a little further along your route, it will use that name in the instruction.
{{As of|January 2015}}, on most road types, this can be prevented. If "segment 1" is the segment following the "turn", "keep", or "exit" instruction:
# the length of segment 1 and the unnamed segments that follow it adds up to 400m or more. AND
# segment 1 is followed by 3 or more unnamed segments.
In this case, when Waze gives instructions to turn into this segment, it will not show or speak a name for the segment. These rules for prevention are ignored for ramp and freeway road types.
=Version 2=
When a user is routed through an unnamed segment, Waze will automatically use the name of the next named segment on the route (name inheritance). This is useful for getting instructions on ramps and turn lanes. This, however, can be confusing in other areas, like large parking lots.
==Conditions for name inheritance==
When Waze gives driving directions to turn, exit, or "keep" onto an unnamed segment, it will look for a name it can use. If there is a named segment further along your route, it will use (inherit) that name in the instruction. This always works for freeways and ramps.
As from (Januari 2015?), this does NOT work if:
{{As of|January 2015}}, on all other road types, this feature only works if:
# A single unnamed segment is more than 400 meters long.
# the length of the unnamed segments is shorter than 400m, <br />AND <br />
# There are more than three consecutive unnamed segments.
# there are no more than 4 unnamed segments in a row.
Im these cases, you will only get the turn instruction. There will be no name written in the display or spoken by the navigation voice.
If the unnamed segments taken together are longer than 400 meter, or if there are 4 or more unnamed segments in a row, Waze will '''NOT''' show or speak a name in the instructions.
Freeways and Ramps are an exception. They can have as many unnamed segments as you like, and be as long as you like. Waze will always generate the next instruction with the name of the next named segment.
=Examples=
[[File:Inheritance_exit_ramp.PNG|thumb|right]]
;exit ramp
:If a freeway exit ramp leads to a fork in the road, you can leave the name off of the exit ramp. Only name the segments which go to a specific destination. Waze will use the name of the next named segment after the unnamed exit ramp. This is only useful if the sign for the exit is the same as the sign for the next named segment.
If the exit off a freeway serves multiple exits further down the road, you can leave the name out of the first exit ramp. Only name the parts of the ramps that go to a specific destination. The Waze client will give all the exit instructions to guide the driver to the correct exit. Of course, this can only be done if the signage for the first ramp is the same as that on the subsequent named ramp.
;Connecting street between the lanes of a divided highway
:If routing from segment A (US-202 N) over the unnamed segment, Waze will use (inherit) the name of the next segment B in the instruction: "Go left to Beta Blvd" If routing from segment C (US-202 S) over the unnamed segment, Waze will use (inherit) the name of the next segment D in the instruction "Go left to Delaney Dr".
{{clear}}
(To me, it remains unclear what happens if an unnamed ramp is longer than 400 meters or have more than three segments, and the next segment is not a freeway or ramp, e.g., when going to a major highway).
;[[file:InheritedName2segments.jpg|thumb|right]]parking lot with unnamed roads
:If the route leads from unnamed parking lot roads to a named road outside the parking lot, Waze might use the road name in instructions for turns INSIDE the parking. This is confusing for drivers. It is a drawback of the feature. For example, coming from segment A, if the next turn is a left to segment 1, and than right to segment 2 (Main Street), Waze will give the instruction to turn left at segment onto Main Street, while still in the middle of the parking lot road...
Latest revision as of 13:43, 3 May 2015
My proposal for the lay-out of the last version:
When Waze gives navigation instructions to "turn", "exit", or "keep" onto an unnamed segment, it will look for a name it can use. If there is a named segment further along your route, it will use (inherit) that name in the instruction.
The inherited name is only used in the displayed and spoken instruction prompts, it does not affect the actual name of the segment.
This always works for Freeways and Ramps .
As of January 2015[update], on all other road types, this feature only works if:
The combined length of the consecutive unnamed segments is shorter than 400 meters (1,312 feet), AND
There are 3 or less unnamed segments in a row.
To explain the above conditions from another perspective:
If the consecutive unnamed segments measured together are longer than 400 m (1,312 ft), or if there are 4 or more unnamed segments in a row, Waze will NOT show or speak a name in the instructions.
Note: Technical source is User:PesachZ/Road name inheritance, which would probably be a good "for more detailed info" or a "see also" link... eventually updated to watever page s actually created for it. Also, that page will be transcludable with a short summary version, which may make sense to transclude here.
Version 1
When a user is routed through an unnamed segment, Waze will automatically use the name of the next named segment on the route. This is useful for getting turn instructions on ramps and turn lanes. This, however, can be confusing in large parking lots.
When Waze uses a name for an unnamed segment
Waze sometimes uses a name for an unnamed segment in a driving instruction. When Waze gives driving directions to turn, exit, or "keep" onto an unnamed segment, it will look for a name it can use. If there is a named segment a little further along your route, it will use that name in the instruction.
As of January 2015[update], on most road types, this can be prevented. If "segment 1" is the segment following the "turn", "keep", or "exit" instruction:
the length of segment 1 and the unnamed segments that follow it adds up to 400m or more. AND
segment 1 is followed by 3 or more unnamed segments.
In this case, when Waze gives instructions to turn into this segment, it will not show or speak a name for the segment. These rules for prevention are ignored for ramp and freeway road types.
Version 2
When a user is routed through an unnamed segment, Waze will automatically use the name of the next named segment on the route (name inheritance). This is useful for getting instructions on ramps and turn lanes. This, however, can be confusing in other areas, like large parking lots.
Conditions for name inheritance
When Waze gives driving directions to turn, exit, or "keep" onto an unnamed segment, it will look for a name it can use. If there is a named segment further along your route, it will use (inherit) that name in the instruction. This always works for freeways and ramps.
As of January 2015[update], on all other road types, this feature only works if:
the length of the unnamed segments is shorter than 400m, AND
there are no more than 4 unnamed segments in a row.
If the unnamed segments taken together are longer than 400 meter, or if there are 4 or more unnamed segments in a row, Waze will NOT show or speak a name in the instructions.
Examples
exit ramp
If a freeway exit ramp leads to a fork in the road, you can leave the name off of the exit ramp. Only name the segments which go to a specific destination. Waze will use the name of the next named segment after the unnamed exit ramp. This is only useful if the sign for the exit is the same as the sign for the next named segment.
Connecting street between the lanes of a divided highway
If routing from segment A (US-202 N) over the unnamed segment, Waze will use (inherit) the name of the next segment B in the instruction: "Go left to Beta Blvd" If routing from segment C (US-202 S) over the unnamed segment, Waze will use (inherit) the name of the next segment D in the instruction "Go left to Delaney Dr".
parking lot with unnamed roads
If the route leads from unnamed parking lot roads to a named road outside the parking lot, Waze might use the road name in instructions for turns INSIDE the parking. This is confusing for drivers. It is a drawback of the feature. For example, coming from segment A, if the next turn is a left to segment 1, and than right to segment 2 (Main Street), Waze will give the instruction to turn left at segment onto Main Street, while still in the middle of the parking lot road...
