Places: verschil tussen versies Geschiedenis weergeven

kGeen bewerkingssamenvatting
kGeen bewerkingssamenvatting
Regel 1: Regel 1:
{{TopLine}}
{{TopLine}}
<languages /><translate>
<languages /><translate>
==Places==
==Places==
<i>Places</i> are searchable destinations in the Waze map, just like the "Points of Interest" found in certain popular GPS devices. They can be added from the client, but also in the [[Waze Map Editor]]. Here you'll find the instructions on how to create a Place in the [[Waze Map Editor|WME]]. <br />
<i>Places</i> are searchable destinations in the Waze map, just like the "Points of Interest" found in certain popular GPS devices. They can be added from the client, but also in the [[Waze Map Editor]]. Here you'll find the instructions on how to create a Place in the [[Waze Map Editor|WME]]. <br />
Regel 34: Regel 35:
If the Area itself needs to be modified, click on the place to select it. Use the geometry points to adjust the shape. To move an area place without changing its shape, drag the [[File:Wme place drag handle.png]] Move Handle icon.<br />
If the Area itself needs to be modified, click on the place to select it. Use the geometry points to adjust the shape. To move an area place without changing its shape, drag the [[File:Wme place drag handle.png]] Move Handle icon.<br />


===Residential or Private Places===
When arriving, Waze proposes to take a picture of your destination. In this way, many private Places are uploaded to [Waze Map Editor|WME]. For these private Places, the category <i>residential</i> is used. Private Places will not be searchable, and the identity of whoever created them or attached pictures, will not be exposed. Private Places only contain photos and an exact address, without all the other properties of a Place. The pictures will only show to people driving explicitly to that address. Waze editors will be using the pictures and exact locations to improve the [[house numbers]] database.
[[File:WME Places convertresidential.jpg|thumb]] Public Places can be turned into private Places, but private Places cannot be turned into public Places. Use the link located under the buttons for Point or Area in the menu, to convert Places mistakenly labeled as public into private.<br />
===Combined Places===
[[File:Wme places mall area with points.png|thumb|Point Places within an Area Place]] Point Places within an Area Place are allowed and mostly used for shops in a shopping mall, faculties within a University campus, etc.. Avoid Areas within Areas, as this may become confusing on the client's display.
===When to use Area or Point in the BeNeLux===
The area size covered by the visible contours is primarily used to determine whether to use a Point or Area type of Place. Recent testing shows that Area Places should be at least 500 m2 (that is, 50 meters in one dimension and 10 meters in the other) to show up in the [[Waze app|app]]. Tests are still being run to find out the minimum size. Until these tests result in different findings, Area Places should have a minimum area size of 500 m2. Anyway, it doesn't make sense to create smaller areas, for they will not be visible in the client's display.<br />
<br />
Exceptions to the minimum area size for the use of an Area Place, are [[Parking Lot Place|Parking Lots]] and [[Gas Station Place|Gas Stations]], which receive special handling and are to this moment always drawn as Areas.<br />
All places are thus generally drawn as a Point Place, except when they are large and distinctive enough to help in the orientation during driving, which will often be the case with an Event Center, Factory, Hospital, Office, Camping, Shopping malls, Museums (e.g.,Rijksmuseum, Amsterdam), Monuments (e.g., Mardasson, Bastogne), Schools, Tourist Site, Attraction, Sports Court or Stadium. They are mapped as areas at the building outline and usually don't cover streets. Keep in mind the minimum area size for the decision to draw an Area instead of a Point. Every other destination, that is not a [[Parking Lot Place|Parking Lot]] or a  [[Gas Station Place|Gas Station]], should be Points.<br />
The [[Place categories|table of categories]] also gives a guideline to choose between point and area places, according to their category, sub-category and probable area size.<br />


===Places details===
Any Place - Point or Area - should contain as much information as possible.


</translate>  
</translate>  


{{Bottomline}}
{{Bottomline}}

Versie van 30 dec 2017 22:33

Andere talen:

Places

Places are searchable destinations in the Waze map, just like the "Points of Interest" found in certain popular GPS devices. They can be added from the client, but also in the Waze Map Editor. Here you'll find the instructions on how to create a Place in the WME.

A Place can be a Point or an Area. Above a given size Area Places become visible in the client. A Point Place is never visible, but both types can be searched and navigated to. There is also a third kind of Place called Residential, which are private addresses. These are always Point Places.

Point Places

Point Places don't show on the Wazers device. They can be used to help Wazers find locations, especially when they are not or wrongly listed in other destination search engines. As they are searchable from the app, accurate positioning of a point location and providing a full address (including street number) are both utterly important.

In the WME, a Point appears as a small circle:
Standard point

Selected point

Modified point

Modified point, pending for approval

The Waze routing server will navigate the Wazer onto the segment which is physically closest to where the Point is placed.
The Point Marker is the stop point. Typically, if the Place is inside a building, the marker should be located at or near the location's main entrance door. Try to imagine where you would stop to drop someone off for this location.

Area Places

Area Places appear in the Waze app. Too many of them can clutter the map, creating large gray zones that do not help Wazers orient themselves. Therefore, it is important to use Area Places only when they are distinctive and significant enough to orient drivers. Care should be taken not to snap to road segment nodes, because this makes it more difficult to edit the place and/or segments later on.

Area Places should have a minimum area size of 500 m2 (e.g., 10m x 50m) to be visible in the client's display. Most of the other places are Point Places, except for Gas Stations, and Parking Lots, which are always areas, and receive special handling. See also the paragraph on how to determine Area or Point.

Generally, an Area Place only covers what a Wazer sees when driving to the actual location. It follows that the Area outline covers the building of the place, but never the whole property. However, an Area Place doesn't have to be as detailed as the building is, actually, it's better to keep the shape roughly.
Natural features such as forests, parks, and lakes are drawn to the visible contours.

The different types of Area Places show in different colors in the app, as well as in WME. The colors vary slightly, depending on your display. Generally, Natural features show green (e.g., Park) or blue (e.g., River).

Area Place for the Namur hospital, with the Point Marker at the entrance, and the Move Handle on the top right of the building


Each Area Place has a “Point Marker“ , which by default is centered. This point can be moved to where you should arrive, or where to park, even a short distance outside of the marked area, indicated by the black outline (see picture). Again, try to imagine where you would stop to drop someone off for this location.

If the Area itself needs to be modified, click on the place to select it. Use the geometry points to adjust the shape. To move an area place without changing its shape, drag the Move Handle icon.

Residential or Private Places

When arriving, Waze proposes to take a picture of your destination. In this way, many private Places are uploaded to [Waze Map Editor|WME]. For these private Places, the category residential is used. Private Places will not be searchable, and the identity of whoever created them or attached pictures, will not be exposed. Private Places only contain photos and an exact address, without all the other properties of a Place. The pictures will only show to people driving explicitly to that address. Waze editors will be using the pictures and exact locations to improve the house numbers database.

Public Places can be turned into private Places, but private Places cannot be turned into public Places. Use the link located under the buttons for Point or Area in the menu, to convert Places mistakenly labeled as public into private.

Combined Places

Point Places within an Area Place

Point Places within an Area Place are allowed and mostly used for shops in a shopping mall, faculties within a University campus, etc.. Avoid Areas within Areas, as this may become confusing on the client's display.

When to use Area or Point in the BeNeLux

The area size covered by the visible contours is primarily used to determine whether to use a Point or Area type of Place. Recent testing shows that Area Places should be at least 500 m2 (that is, 50 meters in one dimension and 10 meters in the other) to show up in the app. Tests are still being run to find out the minimum size. Until these tests result in different findings, Area Places should have a minimum area size of 500 m2. Anyway, it doesn't make sense to create smaller areas, for they will not be visible in the client's display.

Exceptions to the minimum area size for the use of an Area Place, are Parking Lots and Gas Stations, which receive special handling and are to this moment always drawn as Areas.
All places are thus generally drawn as a Point Place, except when they are large and distinctive enough to help in the orientation during driving, which will often be the case with an Event Center, Factory, Hospital, Office, Camping, Shopping malls, Museums (e.g.,Rijksmuseum, Amsterdam), Monuments (e.g., Mardasson, Bastogne), Schools, Tourist Site, Attraction, Sports Court or Stadium. They are mapped as areas at the building outline and usually don't cover streets. Keep in mind the minimum area size for the decision to draw an Area instead of a Point. Every other destination, that is not a Parking Lot or a Gas Station, should be Points.
The table of categories also gives a guideline to choose between point and area places, according to their category, sub-category and probable area size.

Places details

Any Place - Point or Area - should contain as much information as possible.


Main Page | Index