Translations:Improve your skills/3/en Geschiedenis weergeven

Geen bewerkingssamenvatting
Geen bewerkingssamenvatting
 
(254 tussenliggende versies door 4 gebruikers niet weergegeven)
Regel 1: Regel 1:
[[Map Editing (new Editor)|Back to Map Editing]]
On this Wiki page, we have tried to combine technical knowledge of Waze with the users guidelines in the Netherlands. To keep duplicate texts to a minimum, we also refer to other Wiki pages. <br />
 
=Map Editor Layout=
There are four main areas of the Map Editor:
# Toolbar
# Properties Drawer
# Layers (overlays) selector
# Map Display Area
 
[[Image:Papyrus_whole_window_blank.png|600px]]
 
* At the top, a toolbar with a search box, and buttons to Save, Undo, Redo, Trash and Add
* At the left are two elements:
*# In the background, is your username, current points and number of changes currently executed on the map which need to be saved [image]
*# In the foreground is an expandable drawer which displays the properties of the currently selected object. Any editable properties are edited from this drawer panel. [image]
* On the right-side of the main window, really inside the main window space, is a small white on dark blue + icon. This is the layers selector.
* The map display area, which takes up the majority of the space, is the map display area. This has the ability to display aerial/satellite photography, streets, junctions, landmarks, red light/speed cameras, GPS tracks, map problems, and your editable area. All of these are discussed below [image]
 
=Map Editor Controls=
==The Tool Bar==
 
[[Image:Top_toolbar.png|600px]]
 
===Search box===
In the wide search box, you can enter an address, city, state, country, landmark or point of interest, or a combination of those. After hitting Enter or clicking the Find button, you will either be taken to the only result, or be given a list of matches to select from.
 
For example, entering "757 Mohawk St, Columbus, OH" will center the map and drop a search marker directly on that address.
 
[[Image:757_mohawk_columbus_oh_search_results.png|300px]]
 
However, searching for "main st, new york" will get you a list of matches to select from.
 
[[Image:Main_st_newyork_search_results.png]]
 
===Save Button===
[[Image:Button_save.png|left]] Shortcut key: '''Ctrl+s'''
 
The Save button saves all of the current changes you have made. This process is a little more complex than this sounds, but that is what it does. In order to save properly, your browser receives messages back from the Waze server if there were any errors. If there is an error when saving, the editor will try to give you a detailed error message and a suggestion to fix it. The map view will also show the error area highlighted in a bright circle.
 
Once the Save button is clicked and the save operation completes successfully, you cannot Undo previous changes with the Undo button.
 
===Undo Button===
[[Image:Button_undo.png|left]] Shortcut key: '''Ctrl+Z'''
 
The Undo button will undo '''unsaved''' successive previous changes with each click. <span style="color:red;">IMPORTANT: Once the Save button is clicked and the save operation is complete, the Undo button has no effect on previous changes.</span>
 
A change can be deleting a geometry node from a segment or renaming a landmark. It can also be a change to multiple objects at once. For example, if you multi-select 25 street segments to change them from No Entrance to 2-way, that is considered a single change. Therefore, one click on Undo will undo that change for all 25 segments.
 
===Redo Button===
[[Image:Button_redo.png|left]]  Shortcut key: '''Ctrl+Shift+Z'''
 
The Redo button will re-apply any changes which have been recently undone with the Uno button
 
===Delete Button===
[[Image:Button_delete.png|left]] Shortcut key: '''Delete (Del)'''
 
The Delete button will delete, or trash, any currently selected objects. If you have multiple objects selected, you will be prompted to confirm the multiple deletion. The only object you can currently multi-select is segments.
 
Undo does work for deleted objects. Objects are not actually deleted until the Save button is clicked. After that, you cannot Undo any edits or deletes.
 
===Add Button===
[[Image:Button_add.png|left]]
 
The Add Button is not reall a button but actually a menu. You do not need to click on it, just hover your mouse over it and the menu of objects you can add will appear below.
 
From this menu, you can add a Road, a Roundabout, or a Landmark. Details for each of these actions are found in the Editing Manual.
 
 
==Left Background==
[[Image:Points_and_unsaved_changes.png]]
 
On the background of the left side of the window is a message showing your username, your current point total for the server you are editing on (North America or World), and a count of the number of unsaved changes currently queued up for saving. The edit count which shows here is the number of undo-able actions you have made since the last edit. This does not represent the count of edits which will be worth points. The calculation for based from edits is done on the server and is based on the type of edits, and also doesn't allow you to get more points if you change a segment geometry 3 times or change the name multiple times. Those "repeat" edits are counted as a single edit for points calculation.
 
 
==Properties Toolbox==
[[Image:Properties_drawer_tab.png|left]]
 
The properties toolbox is initially shown as a tab which expands to the left when clicked. When there is no object selected on the map, the drawer looks empty. When an object is selected, the contents of the Properties drawer change to reflect the available properties, both editable and non-editable, of that object. Therefore, the look of the drawer when a Landmark is selected is quite different from that of a street segment.
 
[[Image:Junction_properties_example.png|top]] [[Image:Segment_properties_example.png|top]]
 
 
=Layers=
On the right-side of the main window, you will see this small icon: [[Image:Layers_button.png]].
 
When clicked, it expands to display the layers or object types which are available for display on the main map. When the box next to the layer name is checked, then that layer is active and being displayed.
 
[[Image:Layers_selector_expanded.png]]
 
Each of the layers is discussed in more detail later, but a short desription of each is directly below.
 
==Bing Aerials==
[[Image:Aerial_skinny.png|260px]]
 
Waze uses aerial and satellite photography provided by Bing (or VirtualEarth).
 
==Roads==
[[Image:Road_segments_skinny.png|260px]]
 
Roads are all of the streets, alleys, highways, and freeways which make up the driveable street system in Waze. Depending on the zoom level, some street types are not displayed so that the map is not too cluttered.
 
==GPS points==
[[Image:Gps_tracks_straight_skinny.png|260px]]
 
This layer will show tracks from Waze users as they drive with Waze running. Waze records and plots the GPS coordinate of drivers. This layer is useful for relatively accurate placement of new or moved roads when aerial photography is not yet updated. GPS points appear in the map editor as colored arrows. The direction of travel for a GPS point determine its color, so that all drivers going the same direction will show their points in the same color. This makes it easier to determine errant GPS points, or where a road on the map doesn't follow the actual path of vehicles.
 
==Landmarks==
[[Image:Landmarks_skinny.png|260px]]
 
Landmarks are also known as POIs (Points of Interest). These can really be just about anything, but tend to be things like parks, gas stations, cemeteries, transit stations, etc. Landmarks appear in the map editor as colored shapes.
 
==(Speed) Cameras==
[[Image:Speed_cam_enabled.png]] [[Image:Red-light_cam_enabled.png]]
 
Speed cameras, red-light cameras and dummy cameras are shown on this layer. Drivers report camera location and type, and a map editor is required to confirm the existence of the camera, precise location and direction the camera is point before it will appear on the client. Confirmed cameras will pop up a visual and audible alert in the Waze app when approaching a speed or red light camera.
 
===Speed Cameras===
These cameras are permanently mounted systems, triggered by vehicles traveling beyond the posted speed limit. When triggered, it takes a photo of your car, license plate, driver and you receive a citation in the postal mail. Speed cameras in Waze are uni-directional.
 
===Red Light Camera===
These cameras are permanently mounted systems at intersections. They are triggered when a vehicle is illegally in the intersection when the traffic control light is red for their direction of travel. Different countries and US states operate them differently in terms of when they are set to be triggered. Red light cameras in Waze are uni-directional, so for a fully-covered 4-way intersection, four red light cameras are required to notify drivers in all directions.
 
===Dummy Cameras===
Some locations will have what looks to be a speed camera set up, when in fact it is a cheap housing only meant to deter drivers from exceeding the speed limit.
 
 
==Problems==
[[Image:Problem_marker.png|left]]
The Waze servers are constantly analyzing driver's GPS tracks to determine when there might be a problem with the map and uses the Problems layer to alert the editors. Some types of problems tracked are missing roads, incorrect turns allowed at intersection, wrong direction of road.
 
==Editable areas==
[[Image:Editable_area_skinny.png|260px]]
 
Where you can edit is determined primarily by where you have driven. Edit rights are granted within a one-mile radius of where you have driven with Waze running. Your editable area is shown in lighter-colored areas surrounded by a black border. Users who are Area Managers will also see their managed areas in a colored highlighted area.
 
 
=Map Display Area=
All the layers currently selected for display show up in the map display area, which takes up the majority of the browser window. Any object displayed is selectable and editable, depending on your editing rights in the area you are viewing. Select a street and change its geometry. Select a landmark and change its name. Add a road where one should be, or delete a road which should no longer appear.
 
There are four controls or displays in the corners of the map display area:
 
==Zoom Control==
[[Image:Zoom_controller.png|left]] In the upper left corner, the zoom control is one way to adjust the zoom level, or altitude, or the map display area. Clicking + will move in closer, showing more detail. Clicking - zooms out/higher and removes detail. You can also click and drag the selector in between the + and - buttons.
<br style="clear: both" />
 
==Scale==
In the lower left corner is a small graphic showing the current scale of the map display area.
<br style="clear: both" />
 
==Lat/Lon==
The upper right corner shows the latitude and longitude of the mouse pointer as it moves over the map.
 
==Permalink==
In the lower right corner is the underlined word ''permalink.'' The permalink changes any time the map moves or objects are selected and deselected. It is a link to the exact view you are currently seeing in the map display area. You can click it to refresh the map area, or you can right-click and copy the address of the permalink to share via email or in the Waze forums.
 
 
=Navigating the Map Editor=
* Move around the map by clicking and dragging on the map itself
* There are four ways to zoom the map:
# There is a zoom controller on the top left-hand corner of the map. You can either drag the slider up and down, or click on the + and - buttons.
# Double-clicking any point on the map will zoom in one level and center the map on that point.
# Scrolling up with your mouse wheel will zoom in on a certain point, and scrolling down will zoom out, keeping the mouse pointer's location in the same location. On Macintosh systems with a track pad or similar mouse device, dragging left and right performs this action
# Hold the ''Shift'' key down and then click and drag a rectangle on the map. The map will then zoom in onto the selected area:
[[Image:Shift_zoom.png|500px|center]]
 
 
[[Map Editing (new Editor)|Back to Map Editing]]

Huidige versie van 5 jun 2020 om 13:50

Informatie over bericht (bijdragen)
Dit bericht heeft geen documentatie. Als u weet waar of hoe dit bericht wordt gebruikt, dan kunt u andere gebruikers helpen door documentatie voor dit bericht toe te voegen.
Berichtdefinitie (Improve your skills)
Op deze Wiki pagina, hebben we geprobeerd technische kennis van Waze te combineren met de richtlijnen zoals ze in Nederland gelden. Om dubbele teksten te voorkomen refereren we hier en daar aan andere Wiki pagina's. <br />

On this Wiki page, we have tried to combine technical knowledge of Waze with the users guidelines in the Netherlands. To keep duplicate texts to a minimum, we also refer to other Wiki pages.