User:PesachZ/Temporary closures View history

m (updated list)
m (added in function for closures in WME, moved types of closures to overview list template)
Line 1: Line 1:
{{ReturnToEditingManual}}
{{ReturnToEditingManual}}
 
{{addCode|fix details, add overview to other pages listed.}}


Roads may be partially or completely closed in one or both directions for multiple reasons:
Roads may be partially or completely closed in one or both directions for multiple reasons:
Line 12: Line 12:
== Overview ==
== Overview ==


There are five methods to control traffic flow:
{{/Overview list}}
 


#[[Mega events]]
== Hours, days, weeks ==
#[[Road closures]]
#[[How to Report#Closure|Closures report from client]]
#[[Partial restrictions]]
#[[Road Naming (USA)#Construction zones and closed roads|Disconnect road segments]]


{{/Overview list}}
If the road is affected for only a few hours or even a few weeks then use the [[How to Report#Closure|Report > Closure]] feature in the Waze client application. Note this requires a person be physically located at the point of the road closure to report it in the client application. Several people may need to report the closure for it to affect routing fo rall users. Alternately, the road closure can be added directly in WME (see below).
 
== Days, weeks, months, years ==
{{anchor|Weeks, months, years}}
WME has the ability to restrict traffic flow through the Road Closure feature. This feature is restricted to rank 5 editors and above. The closure can be directly in WME, and is visible almost immediately in the client and Livemap. It is displayed prominently on the map as a closure alert, with red and white candy stripe lines along the closed segments. This feature allows editors to temporarily prevent routing over specific segments, without having too make any changes to, or damage those segments and their junctions. If you do not have the required rank to access the Road Closure feature in WME, you can ask a higher ranking editor to do it for you. Your country may have a streamlined monitored process for this, or it can be submitted like any other unlock/update request. In the USA the [http://docs.google.com/forms/d/1oGINt4UEkBV0Par5VCingXzTZpJq9KjG8GbZpGqbRow/viewform  Road Closures Form (USA)] is used for example.


== Hours, days, weeks ==
For [[Road names/USA#Construction zones and closed roads|road construction]] situations, refer to that article for more specific information.


If the road is affected for only a few hours or even a few weeks then use the [[How to Report#Closure|Report > Closure]] feature in the Waze client application. Note this requires a person be physically located at the point of the road closure to report it in the client application. Alternately, the [[Partial restrictions]] feature in [[Waze Map Editor|WME]], can be used for these situations until the road closure feature can be accessed directly in WME.


== Weeks, months, years ==
=== How to add a road closure in WME ===


WME has the ability to restrict traffic flow through the [[Partial restrictions]] feature. For [[Road names/USA#Construction zones and closed roads|road construction]] situations, refer to that article for more specific information.
# Select the segments you want to close.
# Click the {{key press|Add Closure}} button in the left panel.
# Click to add a new closure in the pop-up frame.
# Enter a general name of the closure, this will be displayed in the closure alert bubble when the closure alert is clicked/tapped on in the client and Livemap. ''(This can be the name of the road, the interchange, or the area if several roads in a known area are being closed.)''
# Enter a description for the closure in the "Reason" field. This will also be displayed in the closure alert bubble.
# Enter the Date the closure will start, ''(this can be a date in the past)''. Use the YYYY-MM-DD format.
# Enter the time the closure will begin in 24 hour format (00:00).
# Enter the date and time the closure will end in the same formats, ''(this can not be more than 180 days after the start date)''.
# Choose if the road should be closed in only a specific direction, or in both directions (using the A and B nodes for reference).
# If this closure is related to a nearby [[Mega event]], choose the event from the drop-down.
# Save the closure, and verify it saved correctly in WME and in livemap, and/or the client.
{{addCode|Not sure how the event functionality will work, check if this statement is still correct.}}


== Daily for certain times ==
== Daily for certain times ==


If the road is closed every day or numerous days for a certain time of day, the proper solution will require [[Time-based turn restrictions]], also known as scheduled restrictions.
If the road is closed every day or numerous days for a certain time of day, the proper solution will require [[Partial restrictions]], also known as Scheduled or Time based restrictions. You will have to wait for a tile update for the routing changes to take effect, so you may want to add a Road Closure from WME for the first couple of days. (Unless of course, you would like to, and are able to enter each days closure individually in WME, to take advantage of the visual benefits in the client and livemap.)


== NOTES for all durations ==
== NOTES for all durations ==

Revision as of 22:37, 28 October 2014

Template:ReturnToEditingManual

fix details, add overview to other pages listed.

Roads may be partially or completely closed in one or both directions for multiple reasons:

  • Road construction
  • Natural disasters
  • Local events

Also these instances may close a road for a few hours, days, weeks, and even years. Depending upon how long the road will be closed will determine what method is used to update the map..

Overview

There are five methods to control traffic flow:

  1. Mega events
  2. Temporary closures
  3. Closures report from the client
  4. Partial restrictions
  5. Disconnect road segments
  • Mega event - A major event that will typically have road closures or detours. It is usually a scheduled event with significant exposure and likely to impact an entire community. A major natural disaster can be added after it occurs if roads are going to be rerouted for many days.
  • Temporary Closures - Temporary Closures can be entered in WME, or through the client as you drive by them. See next item for Closures report from client. Closures can be added to segments in WME by high ranking editors, without actually modifying the segment, or its turn restrictions. These display in the client and Livemap with alerts and candy stripes on the segments notifying users of the closures.
    Due to its' safety and visibilty, this is the preferred method for closing a road.
    Editors who do not have access to add closures in WME can request a higher ranking editor to help using a designated request format, or the unlock/update request for their country. In the USA the Road Closures Form (USA) is used.
  • Closures report from the client - Users in the client app can mark an unexpected road closure they see while driving. It is typically used for unexpected, short term closures of up to a few days. This feature requires multiple users at the location to enter the same road closure information on the map before it will be seen by other drivers.
  • Partial restrictions - AKA Scheduled or Time-Based Restrictions. Used when turns or roadways are restricted for certain times of day, days of the week, vehicle types, etc. It has the ability to only restrict during a specific date range, so it can be used in place of mega events or temporary road closures if necessary (as a last resort).
  • Disconnect road segments - Road segments should only be physically disconnected if the road is no longer intended to connect or is being permanently removed. In the past, this method was used for longer term construction projects, but now the Road Closure feature should be used.


Hours, days, weeks

If the road is affected for only a few hours or even a few weeks then use the Report > Closure feature in the Waze client application. Note this requires a person be physically located at the point of the road closure to report it in the client application. Several people may need to report the closure for it to affect routing fo rall users. Alternately, the road closure can be added directly in WME (see below).

Days, weeks, months, years

WME has the ability to restrict traffic flow through the Road Closure feature. This feature is restricted to rank 5 editors and above. The closure can be directly in WME, and is visible almost immediately in the client and Livemap. It is displayed prominently on the map as a closure alert, with red and white candy stripe lines along the closed segments. This feature allows editors to temporarily prevent routing over specific segments, without having too make any changes to, or damage those segments and their junctions. If you do not have the required rank to access the Road Closure feature in WME, you can ask a higher ranking editor to do it for you. Your country may have a streamlined monitored process for this, or it can be submitted like any other unlock/update request. In the USA the Road Closures Form (USA) is used for example.

For road construction situations, refer to that article for more specific information.


How to add a road closure in WME

  1. Select the segments you want to close.
  2. Click the Add Closure button in the left panel.
  3. Click to add a new closure in the pop-up frame.
  4. Enter a general name of the closure, this will be displayed in the closure alert bubble when the closure alert is clicked/tapped on in the client and Livemap. (This can be the name of the road, the interchange, or the area if several roads in a known area are being closed.)
  5. Enter a description for the closure in the "Reason" field. This will also be displayed in the closure alert bubble.
  6. Enter the Date the closure will start, (this can be a date in the past). Use the YYYY-MM-DD format.
  7. Enter the time the closure will begin in 24 hour format (00:00).
  8. Enter the date and time the closure will end in the same formats, (this can not be more than 180 days after the start date).
  9. Choose if the road should be closed in only a specific direction, or in both directions (using the A and B nodes for reference).
  10. If this closure is related to a nearby Mega event, choose the event from the drop-down.
  11. Save the closure, and verify it saved correctly in WME and in livemap, and/or the client.
Not sure how the event functionality will work, check if this statement is still correct.

Daily for certain times

If the road is closed every day or numerous days for a certain time of day, the proper solution will require Partial restrictions, also known as Scheduled or Time based restrictions. You will have to wait for a tile update for the routing changes to take effect, so you may want to add a Road Closure from WME for the first couple of days. (Unless of course, you would like to, and are able to enter each days closure individually in WME, to take advantage of the visual benefits in the client and livemap.)

NOTES for all durations

The current time frame for map tile generation is every day on all map infrastructures. Due to when the map update cycle starts, road closures and openings should be saved in the editor two days prior to the event.

  • Don't forget to edit the map back when the road partially or completely reopens.
  • If a road is closed, it is generally a last resort to disconnect the section of road that is closed. Try one of the other alternatives first and if none of those will work for your situation, then considering disconnecting the road. Changing the road direction to "Unknown" will not prevent routing on the road since this means to Waze that it should analyze drives along this segment and change the road direction automatically. This setting will allow Waze to create routes along the road as if it were a 2-way segment.
  • If one direction of a road is closed, change the road direction to "One-Way" and also put a turn restriction as appropriate on junctions with the road.
  • There is no need to edit the map for lane closures.
  • If the road is slower than usual, Waze will learn the average road speed has fallen and make automatic Road reports.
  • If there is an official detour route, Waze will learn about it as you drive it.
  • You should check all surrounding roads are mapped properly and have correct directionality and connectivity so that Waze can find the best detour.

Template:ReturnToEditingManual